Wind Power Alternators Rectangle Neodymium Grade N48H Magnet

Wind Power Alternators Rectangle Neodymium Grade N48H Magnet, Super Strong 150ºC Operating Temp Magnet, Cuboid block magnets for wind turbines/generators/alternators, High Grades Wind Turbine Generator NdFeB Magnets, Neodymium Block Magnet

Wind Power Alternators Rectangle Neodymium Grade N48H Magnet Part No. HSWTNM-502504N48H
Dimensions: 50.00 x 20.00 x 4.00mm thickness
Tolerances: ±0.5mm
Material: NdFeB, Grade N48H
Plating/Coating: Ni-Cu-Ni (nickel) triple plated
Magnetization Direction: Axial (Poles on Flat Ends)
Max Operating Temp: 120ºC
BHmax: 48 MGOe
Br: 14.2 kG

Our High Grade optimizes the various magnetic properties to minimize cogging, Ripple Torque, and total breakaway Torque. Total magnet performance loss is less than 0.5% when the magnets are cycled to 90°C. In addition, our H SH Grade NdFeB magnets are designed to run at temperatures as high as 150°C, and in critical situations of an emergency shutdown, or a short circuit at the machine terminals, their enhanced magnetic properties increase flux density survivability.

Block Magnet is one regular shape of Rare earth magnets and permanent magnets.
It is always manufactured via Cutting and grinding etc .Block magnets or Rectangle magnets have the following important factors such as, Length,Width, Thicknes, Round Edge etc.
Our neodymium block magnets are mainly used in MRI equipment, liner motor, wind turbine and magnetic separator.
With our advanced equipment like hydrogen decrepition frunance and continuous sintering furnace, we can mass produce high grade like N52, 45H, 42SH, 38UH etc.
Also with our experience in material preparation and machining, we can produce very big block, such as 8″ length and 4″ width.
We are also expert for packaging and transporting the high energy big block neo magnets.
Our plating options include: nickel+copper+nickel, black epoxy and environmental Zinc coating.

HSMAG offers wind power high grade NdFeB magnets with energy products up to 48 MGOe and maximum operating temperatures of 150°C. Rectangular parts may be manufactured up to 150 mm long x 101 mm wide x 38 mm thick, with tolerances as tight as ±0.13 mm. Laminated and non-laminated flux concentrators are available as a complete assembly. Other wind power Neodymium high grades offering higher operating temperatures, are available in slightly smaller overall sizes. In addition, various geometries are available including arc and breadloaf shapes.

High Grades Generator Wind Turbine NdFeB Magnets, Big Super Strong Rectangle 120ºC Operating Temp Wind Power N45H Magnet