Call Us Today! 86-15990205383, 86-574-87562591

Water Flow Switch Magnet Diametrial 4 Poles

/Water Flow Switch Magnet Diametrial 4 Poles
  • Water Flow Switch Magnet Diametrial 4 Poles

Water Flow Switch Magnet Diametrial 4 Poles, Water Flow Sensor Magnets, Water Flowmeter Magnet, Injection Molded Ferrite Magnetic Assemblies, Bonded Rare Earth magnet materials such as NdFeB, SmCo and SmFeN can molded as well as Ferrite material, Injection Molded Permanent Magnets, Isotropic and Anisotropic Permanent Plastic ferrite bonded magnet, Magnetic Assembly China Supplier

Water Flow Switch Magnet Diametrial 4 Poles Part No. HSIMM-10
Material: injection-molded ferrite
Number of magnetizing poles: radial multipole 4 poles
Purpose: flow sensor, water flowmete

This specification defines the dimensional and magnetic properties of a multipole magnetic ring for sensor applications.
Injection Ferrite Flow Sensor Magnets Diametrial 4 Poles
Specifications:
Material: Plastic bonded Ferrite magnets
Magnet Shape: Ring
Magnet Size: customized
Magnetization: Diametrial 4 Poles
This specification defines the dimensional and magnetic properties of a multipole magnetic ring for sensor applications.

The product name is water flowmeter magnet, flow sensor magnet, flow sensor rotor. The magnetization mode is radial multipole. If you are interested in this product, please contact by email.

Water Flow Sensor Magnets
Water flow sensor is a type of water flow induction instrument which output pulse, current or voltage signal through induction to the water flow. The output of the signal has a certain linearly proportional to the water flow. Thus can be served to the management of water control and flow calculation depend on the relevant conversation formula and comparison curve. Actually, as a core component of water flow sensor, water flow sensor magnets have long been a typical application of injection molded ferrite magnet.

Working Principle of Water Flow Sensor
Water flow sensor is mainly composed of copper valve body, water flow rotor assembly, steady flow system and hall component. Water flow sensor is usually installed on the inlet of the heater to measure influent flow, and magnetic rotor assembly rotates when water flow through it. Hall component output and feedback corresponding pulse signal to controller, then controller adjust current of proportional valve and hence gas usage according to the flow rate.

Water flow rotor assembly mainly consists of turbine switch housing, magnetic rotor, and brake ring. Water flow sensor magnets are essentially a hall effect sensor magnet. Hall component will conduct when different magnetic poles toward it, then cut off once away.

Injection Magnet Plastic Magnet What is Injection Moulding

Magnet material can be directly molded into, onto, or against other assembly components eliminating subsequent assembly steps. This is called insert injection molding.

Injection molded magnets are available by using ferrite, neodymium-iron-boron, or blends of magnetic materials to achieve an extensive range of properties. Binder materials include Nylon 6 and 12, PPS, and Polyamide. The binders and magnetic alloys are capable of a wide range of working temperatures from below -40°C to above 180°C. The Injection molding process allows the ability to produce very intricately shaped magnets with extremely tight tolerances and a wide variety of physical and magnetic characteristics. The finished parts can be either very simple or complex in geometry. Radial Multipole Flow Sensor Rotor Magnets, Injection Ferrite Flow Sensor Magnets Diametrial 8 Poles

The properties of injection molded magnets vary greatly, depending on the type of magnetic material and binder utilized. HSMAG has both Neodymium and Hard Ferrite injection molding capability, and it is also possible to utilize a blend of different magnetic material to produce the desired properties. Several types of binder can be employed depending on the application, and we offer a variety of nylon and PPS grades to suit the specific needs of our customers. Water Flow Sensor Magnets, Plastic Bonded Ferrite 4 Poles Flow Sensor Magnets

Benefits of Injection-Molded Ferrite:
Ideal for large production runs. Injection Moulding Water Flowmeter Magnet
May be molded into complex shapes
May be molded onto shafts or to be attached to other components
Tolerances as tight as 0.01 mm
Impact and chemical resistance. Impeller Magnets for Water Flow Sensor
Energy products to 16 kj/m3
Isotropic and Anisotropic grades
Neodymium hybrids can increase performances
Co-injected assemblies

More
  • Customized is Available
  • Affordable price
  • Quality guaranteed
  • T/T or L/C accepted
  • Other payment accepted
  • Fast shipping, Worldwide delivery
  • 24-Hours excellent customer service
  • Offer free magnetic solution
  • Bulk discounts for larger orders

Product Range

Imperial
Metrics
error: Content is protected !!