Magnetic Drilling Machine, Power Feed Magnetic Drill, Adjustable Position Base Magnetic Drill Press, Magnetic Drill Presser with Reverse Switch, Portable Magnetic Drilling Machines, Mag Drill, Magnetic Drilling System, Typhoon Magnetic Drill Roto-Broach Magnetic Drilling Machine Features: Part No.: HS-MD80 Cutter capacity : Diameter 12-80mm Twist Drill : Diameter 1.5-31.75mm Max.Drilling depth : 70mm Spindle holder : Diameter 31.75mm（11/4″）WELDEN No […]
Standard Mag Drills HS-MD32, Manual Feed Mag Drills, Standard Magnetic Drills, Ultra Low Profile Mag Drills, Hydraulic Powered Mag Drills, Nitto Kohki Mag Drills, Hougen Mag Drills, Jancy Mag Drills
Manual Feed Mag Drills Press Features:
Part No.: HS-MD32
Cutter Capacity : Diameter 12-32mm
Twist Drill : Diameter 3-16mm
Max.Drilling depth : 60mm
Spindle holder: Diameter 19.05mm
No load speed: (I）450r/min（Ⅱ）220r/min
Electric Data: 220～230V/50Hz/1200W
Magnetic Force: 15000N
Magne Size: 160×80×46mm
Net Weight : 11.5kg
Carton size: 37x18x42.5cm
Magnetic base drills, also known as mag drills or slugger drills, are used to drill heavy steel sections where a handheld drill would not suffice. The base of the drill features an electromagnet, that when energized, locks the base of the drill to the steel profile and allows the operator to apply a steady drill feed rate without dislodging or moving the base. These drills vary in size, weight and their horsepower, thereby affecting the hole diameter they can drill. They are mostly used in structural steel but are also used in applications such as drilling truck frame rails, steel signage, guard rails, etc.
Mag drills normally use annular cutters as opposed to solid drill bits. These are hollow cutters, so only the outer perimeter of the drill is in contact with the steel, thereby significantly reducing the horsepower needed to drill a given diameter.
Extremely compact mag base drilling unit for on-site drilling. The MAG DRILL is a small, but powerfull drill that packs an unexpected punch in a compact 22 pound package. With all metal construction and “Smart Magnet” circuitry is a durable and efficient unit. It has through spindle coolant and a multi-position coolant bottle and a patented internal motor cord. Optimum power/weight ratio for working at height. Handwheel position can be changed in order to work in confined spaces. Concealed motor wiring prevents wires from snagging or getting caught in tight spaces. Gravity-fed cooling lubrication. Contact and chip guard. Easy guide adjustment. Right or left hand feed handles. 1-3/16-inches maximum cutter diameter. 2-inches maximum cutter drilling depth. 750 watt power consumption. 430 watt power output. 680 rpm no load speed. 430 rpm load speed. 3/4-inches weldon shank cutter holder. 2-1/2-inches stroke. 1800 pounds magnetic holding force. Magnet foot measures 7-inches by 3-3/4-inches. 13-feet cable with plug. Measures 9.65-inches length by 7.68-inches width. 11.02-inches to 14.17-inches height. Includes (1) case, (1) coolant tank, (1) safety strap, (1) chip hook, (2) centering pins, (1) 5-millimeters hexagon wrench, (1) safety guard.