Zn Coated Servo Motor Magnets N35H, Permanent Magnet DC Motor Arc Magnets, Arc Segment Strong Neodymium Magnet, NdFeB segment magnets for DC servo motors, shunt control motor, split series motor, permanent magnet shunt motor Zn Coated Servo Motor Magnets N35H Feature: Plating Zinc / Zn Material Permanent Neodymium Magnet Grade N35H Shape Arc Dimension 12.7xR18XR15X2.08X70 […]
Precision Non-magnetic V-block, M-shaped Non-Magnetic Induction Blocks, Non Magnetic Transfer V-Block, M-shaped Magnetic Induction Block, NonMagnetic Transfer Parallel China Supplier
Precision Non-magnetic V-block Feature:
Part No: HSKMV-W1 ~ HSKMV-W7
Precise angle for measure
One set consists of two blocks
A wide variety of models to select from
The Precision Non-Magnetic V-Block is widely used in metalworking or other fields such as optics. There’s a vast variety of models to suit your specific application needs, and one set contains two blocks. These non-magnetic blocks feature a precise angle for accurate measuring.
Magnetic induction block used to extends magnetic force to hold bar, round, or irregular shaped workpieces. Works with surface-grinding applications and other magnetic workholding chucks.
It is one of important machinery accessories, The magnetic induction blocks are not magnetized themselves, They are used in combination with a magnetic chuck as an auxiliary tool to hold round bars. flank of plates that dificult to hold only by by chucking. It can be magnetized after inducted on any magnetic chuck applying for as plate or 45 fixture (flat surface or 45 degree). It is used as auxiliary tool by applying with magnetic chuck for holding round, thin or shapes that difficult to hold. There are mainly two types of induction blocks, rectangle and M shape for different processing. demands.
For use with magnetic chucks, these V-blocks sets are precision ground and secure in any position. Strong magnetic force means there’s no wasted time fooling with traditional clamps. Sold in pairs. Non magnetic blocks, magnetized after being inducted on any magnetic chuck. Useful for grinding work where magnetic chuck alone can not hold on to workpiece.
Magnetic V-Blocks Application: For machining on special shape workpieces. Features: 1.) Brazing treatment. 2.) High magnetic penetration because of no interference from screws and rivets. 3.) It can be cut and divided into a desired size/ shape. Introducing for the first time in China special type Magnetic V Blocks. These ‘V’ blocks have been specially built for applications where heavy inspections are involved.