German Standard Ceramic Ferrite Block Magnets, Low Price Free Sample European standard Magnets, Block Shape Barium or Strontium ferrite permanent magnets for compressor / motors, Sintered Ferrite Rectangular Bar Magnet, Anisotropic & Isotropic Ferrite Block Rectangle Magnet China Factory German Standard Ceramic Ferrite Block Magnets Parameter: Type: Permanent Composite: Sro or Bao and Fe2o3 Shape: Block, […]
Permanent Magnetic Water Conditioner, Powerful Permanent Magnet Water Conditioning Device, Magnetic Water Treatment Conditioner, Strong Neodymium Magnetic Water Softener No Salt Water Treatment
POWERFUL Permanent Magnetic Water Conditioner Feature:
Part No.: MWTS-03
It is best to know how hard your water is to determine how many units you need for your particular application. Your city water departments have that information available upon request. Private well owners can have their water tested also. But you should have a good idea of how hard your water is, even if it hasn’t been tested. If it’s not that bad but still is hard water you may only need one unit on your main water line. If it’s the hardest water you have ever seen then you may need three units for your main water line. If it’s in-between then two may work just fine.
To protect the steel frames a two step powder coat treatment is used. The steel frames are plated with phosphate as a primer coat and then given a powder coat treatment using polyester powder. This provides long term corrosion resistance.
The magnets are High Grade Triple Plated (Nickel, Copper, Nickel) Neodymium Magnets which produces the most powerful flux density possible using permanent magnets.
The faces of the magnets are fully protected against mechanical abrasion and galvanic corrosion. Bare faced Neodymium magnets can not be used on copper pipe in a damp environment without this added protection. Don’t buy from any vendor who does not understand this issue. These magnets will last a lifetime but only because they are well protected against abrasion and corrosion of the magnet plating.
All of the fasteners are Stainless Steel for long term corrosion protection and minimal reaction to the magnetic field.
Magnetic Water Conditioner come Fully Assembled ready to go with no rework required.
Here are the guidelines on this:
If the Total Hardness of your water is 10.5 Grains (180 ppm) or less, one unit on the cold water source may be all that you need.
If it ranges between 10.5 and 15 Grains (180 to 257 ppm) we recommend two or three units on the cold water supply.
You should use three units on the cold water supply if your Total Hardness exceeds 15 Grains (257ppm).