MagPad-2 Threaded Stud Mag Pad, Rubber Coated Magnetic Pad, Extra Strong Rubber Covered Magnet Plate Holder, Magnetic Mounting Pads, Threaded Stud Car Roof Top Magnets China Factory Threaded Stud Mag Pad MagPad Part No. MagPad-2 by HSMAG Features : Magnetic Pads (commonly known as ‘MagPads’) are used for securing objects to magnetic surfaces. The pad […]
NdFeB Universal Magnetic Ball Joint, Ball Joint Magnets Mounting Assembly, Magnetic Ball Joints holding device, NdFeB Permanent Magnetic Ball Joint, Magnet Joint Spherical Ball Screw for 3D printer, permanent neodymium magnetic tool China supplier
NdFeB Universal Magnetic Ball Joint Features
·Made with powerful NdFeB magnet
·Suitable for use in exhibition stands or truss display systems
·Body made of brass with tapped hold to mount on any surface
·Can hold anything within stipulated load at any angle
·Allows the steel ball to rotate a full 360 degrees on a 180-degree axis
Knowing This Tool
permanent neodymium ndfeb universal magnetic ball joint is a holding device that has flexible joints with a 8-25 mm diameter steel ball, which is held by rare earth magnets contained in the magnet cylinder. The magnetic ball joints allow the steel ball a full 360-degree rotation on a 180-degree axis. This way no damage occurs if the ball comes off the magnet cylinder, and the joints can work just as well as before when reset.
Magnetic Ball Joints is a holding Device which has flexible joints with a diameter10mm steel ball held by powerful rare earth magnets contained in the magnet cylinder. And the magnetic ball joints allow the steel ball a full 360°rotation on a 180°axis. This caused even if the ball comes off from the magnet cylinder, no damage can be made and the joints can work just as well as before when reset.
Due to the use of high-energy rare-earth magnets, magnetic ball joints have a very strong holding force. The resulting displacement force of the ball is strong enough to hold the optical systems of cameras, lighting fixtures or laser units without requiring a mechanical fixation. And there are many models of the magnetic ball joints with threaded, showed in below diagram.
Since the magnetic ball joint is electro-conductive, rapidrelease and rotatable electrical connections can be made with such a system. This is of advantage, for instance, in modern low-voltage lamps. Rapid-release connections for test fixtures are also possible. In lifting linkages a predetermined breaking point can be provided, or sideways movements compensated. Due to the use of high-energy rare-earth magnets, magnetic ball joints types KD… have a very strong holding force. The resulting displacement force of the ball is strong enough to hold the optical systems of cameras, lighting fixtures or laser units without requiring a mechanical fixation. Magnetic Ball Joints
|KL||L||G||GL||IG||IGL|| Ball with inner thread
M 4/3,5 mm deep without
thread IG on the rear
|K8||8,0||12,5 ± 0,05||18,0||12,0||–||–||–||–||Holding force10,0 N(1,0 kp)|
|KD310||10,0||10,0||28,0||20,0||M3||12,0||M3||5,0||Holding force||18,0 N||(1,8 kp)|
|KD312||12,0||10,0||30,5||20,0||M3||12,0||M3||5,0||Holding force||18,0 N||(1,8 kp)|
|KD413||13,0||13,0||31,0||20,0||M4||12,0||M4||6,0||Holding force||40,0 N||(4,0 kp)|
|KD418||18,0||13,0||36,0||20,0||M4||12,0||M4||6,0||Holding force||40,0 N||(4,0 kp)|
|KD516||16,0||16,0||34,0||20,0||M4||12,0||ohne||–||Holding force||70,0 N||(7,0 kp)|
|KD625||25,0||20,0||47,0||25,0||M5||16,0||M5||5,0||Holding force||150,0 N||(15,0 kp)|
|KD725||25,0||25,0||56,0||35,0||M5||16,0||M5||7,0||Holding force||200,0 N||(20,0 kp)|