1 x 1/2 x 3/16 Inch NdFeB Double Countersunk Bar Magnets N52, Counterbore Countersunk Rectangular Bar Magnet Neo Cup Magnets Pot Magnet, Strong Powerful Countersink Rectangle Square Magnets, Neodymium Iron Boron Blocks, Sintered NdFeB Fishing Magnet, NIB, Neo holding magnets, Permanent Industrial Magnet China supplier factory 1 x 1/2 x 3/16 Inch NdFeB Double Countersunk […]
Channel Mounting Magnet W/2 Countersunk Holes, Countersink Neodymium Channel Holding Magnet, Channel Neodymium Magnet, China Channel Magnets Supplier, Rectangular Cup Magnet with Countersunk
Channel Mounting Magnet W/2 Countersunk Holes Feature:
Part No.: HSNIB-60
Dimensions: L(60mm) * L1(50mm) * W(13.5mm) * H(5mm) * D1(3.3mm) * D2(6.5mm)
Holding Force: 30 (KG)
Shape: Rectangular / Block / Bar
Material: Countersunk / Countersink Neodymium Magnets / Steel Shell Pot
Plating/Coating: Ni-Cu-Ni (nickel) triple plated, Galvanized
Magnetization Direction: Through thickness
Max Operating Temp: 176ºF (80ºC) or as per needs
Tolerances: ±0.004″ (+/-0.1mm)
Other: All magnets passed QC(Br. Flux.Dimensions) and 24-Hour Salt Spray Test.
For NIB40-NIB130, there is only one Countersunk Hole, for the rest, there are two.
A powerful countersunk nedoymium magnet fixed into the steel channel forming a magnetic channel assembly with strong adhesive force on the surface.
This neodymium channel magnet is made of a super strong neodymium magnet encased inside a chrome plated steel circuit which triples the holding force to 50 lbs, which is 15 pounds stronger than an equivalently sized standard channel magnet! At the same time, the steel channel also protects the magnet from being damaged during day to day use. It’s perfect for use as a cabinet latch, to keep nuts and bolts in one place, or even tools handy. There are two #6 countersinks at each end of the magnet to allow for a flush installation to maximize holding power.
Channel assemblies can be up to 32 times stronger than a ceramic magnet and their pull strength is tested on a flat steel plate. The pull can change based on which surface it is attracted to, so Argus suggests getting a sample that you can test and make sure of its pull and holding ability for your particular application. Contact us for more information about channel magnets or to purchase channel magnetic assemblies.
Channel Magnetic Assemblies are a high strength and low cost option for a huge variety of applications. The assemblies are usually produced with a magnet set into other non-magnetic material. They are made this way to channel and increase the magnetic force in a particular direction.
Channel Magnet assemblies are commonly used in a wide variety of fixtures, latches, signs and displays, and in the attachment points of products with magnetic bases like light bars, sirens, lights and lanterns.