Call Us Today! 86-574-27667267|info@hsmagnets.com

Magnetic Vise

/Magnetic Vise
  • magnetic vise

Magnetic Vise, Magnetic Workholding Vises, Magnetic Block Clamping System, Permanent Magnetic Vise, Magnetic Workstop Assembly, Multifunction Magnetic Vise, Magnetic Apparatus

Magnetic Vise Technology Data:

Part No: HSMV-DYT  Series
Dimension: As shown below table
The minimum thickness: 15-30mm
Magnetic Force (Side): 250kgf-2000kgf
Magnetic Force (Top): 200kgf-1500kgf
Explaination: with or without connecting on/off switch
Weight: 5-26 KG

HSMV-DYT Series Magnetic workholding :
1.It is a new concept of clamping. It has a national patent and superior product quality.
2.It can be used separately or conbine severel together for vertical or horizontal CNC machining, milling machine,grinding machine etc.
3. Five surface cutting and drilling.
4. It’s clamped uniformly and has high level of accuracy.
5.The workpiece can be replaced quickly and easily.
6. Workpiece can go beyond the worktable, save processing process and reduce repetition tolerance.

APPLICATION

Suitable for medium and large workpieces not for small ones.

FEATURES

1. Five sides machining can be realized. Complete drilling, tapping, slotting just once.
2. Free to set up position, numbers and distance of magnetic workholding acccording to the size of workpiece.
3. It includes changable induction metal block which can be fixed to be 100% accuracy on the workholding before workpiece processing. Also can complete drilling, tapping and slotting directly to the induction metal block during workpiece processing.
4. Finishing workpiece processing when the two steps have been done, efficiency and accuracy are both increased.

Specification

  1. Most suitable for medium and large size of workpiece machining on milling machine and CNC machining center.
  2. Minimum size of workpiece required as bigger than an area of two Magnetic Clamping Blocks.
  3. The Magnetic Clamping Blocks are not suitable for small workpiece clamping.

Note

Please always make sure the Switch was in ON position before machining.
The Magnetic Clamping Blocks are not suitable for non-magnetic material, such as brass, copper, aluminum and stainless steel, etc.
The principle of Magnetic Clamping Blocks is magnetism of N. S. poles, so please always put the workpiece between N. S. poles.
(The middle of top clamping range)
Instructions for Use Magnetic Vise

1 Prepare before use
1-1 According to the size of the workpiece (the workpiece and permanent magnet sucker surface magnetometer contact the number of the number of) a reasonable development of the cutting range of the machine.
1-2 Wipe the bottom surface of the suction cup and clean the surface of the machine table. Place the suction cup in the appropriate position on the machine table. Fix the suction cup with the pressure plate and the matching T-slot bolt, nut and washer. Machine workbench.
1-3 Use the dial indicator to measure the parallelism of the table on the machine table and correct the sucker according to the requirements. If necessary, use the machining function of the machine to correct the working surface of the sucker to reach the required parallelism.

2 Workpiece holding
2-1 Place the workpiece in the appropriate position on the table surface of the suction cup and turn the eccentric shaft counterclockwise from the OFF position (OFF) to the ON position (ON) (approx. 180 °) using the hex wrench (supplied) The workpiece is sucked sucker.
2-2 If the workpiece is small, the auxiliary stop can be added reasonably around the workpiece according to the tool cutting direction and the direction of the tool. The auxiliary stop should be placed with the workpiece before the workpiece is sucked.
2-3 Do not drill the work surface, if it can not be avoided, the drilling position should be selected in the magnetic blocks, to avoid playing in the box and the box between the epoxy bar. Depth of the largest 10mm.

3 Release of the workpiece
After machining, the eccentric shaft is rotated clockwise from the ON position (ON) to the OFF position by the hexagonal wrench, and the workpiece is removed from the suction cup table.

Magnetic Vise Note:

Do not hold the handle in the process of holding or releasing the workpiece during operation. Do not release the handle during operation to avoid accidental action due to the magnetic action that causes the handle to automatically spring back to the OFF position.

4 Factors affecting the workpiece suction
4-1 The surface of the workpiece should be flattened. If the surface of the workpiece is abutted by grooves or grooves, the suction of the workpiece by the suction cup will be affected.
4-2 the size of the workpiece will be holding area will affect the suction force on the workpiece, the workpiece area is small, a small number of groups of magnetic contact, suction force to small, while the workpiece is too small, the handle will handle large sucker, Causing inconvenience.
4-3 workpiece thickness will also affect the workpiece suction force, the workpiece is too thin, will reduce the suction force on the workpiece, the workpiece is too thick, will make the cutting force on the workpiece torque is too large, affecting the stability of the workpiece.

5 Maintenance and maintenance (please do not open the permanent magnet sucker)
5-1 should be kept suction cup table clean, after use should be disconnected magnetic circuit, and coated with anti-rust oil.
5-2 It is forbidden to deposit debris on the work surface to avoid affecting the flatness.
5-3 in the handling process, to prevent the work surface bump, knock hair, so as not to affect the performance.
5-4 In the course of long-term use, if the work surface roughness, flatness or parallelism after installation of the workpiece tolerance, machine tool conditions can be used to repair.
5-5 found in the course of the hexagonal wrench pull the eccentric shaft handle when the handle force is too large or insufficient suction force should be promptly contacted with the purchase of manufacturers to repair.

More
  • Customized is Available
  • Affordable price
  • Quality guaranteed
  • T/T or L/C accepted
  • Other payment accepted
  • Fast shipping, Worldwide delivery
  • 24-Hours excellent customer service
  • Offer free magnetic solution
  • Bulk discounts for larger orders

Product Range

Imperial
magnetic-vise-technology-data-drawing

magnetic-vise-technology-data-drawing

HSMV-DYT Series Multifuctional Permanent Magnetic Workholding Parameters

Model

Magnetic Force (Side)

Magnetic Force (Top)

The minimum thickness
of the workpiece

size(mm)

Net Weight
(KG)

L

B

H

HSMV-DYT-200A

2000kgf

1500kgf

30mm

275

132

94

26

HSMV-DYT-200B

HSMV-DYT-150A

1500kgf

1200kgf

25mm

234

130

94

22

HSMV-DYT-150B

HSMV-DYT-100A

1000kgf

750kgf

20mm

216

115

94

18

HSMV-DYT-100B

HSMV-DYT-50A

500kgf

350kgf

15mm

113

100

74

9

HSMV-DYT-50B

HSMV-DYT-25A

250kgf

200kgf

15mm

66

98

74

5

Remark: We are sorry to say that we have no explanation if there is some change of above sizes.

A: with or without connecting on/off switch

B: with or without connecting on/off switch

Metrics