Magnetic Vee Block

Magnetic Vee Block, Mitutoyo Magnetic V Blocks, Precision Magnetic V Vee Block, MAGNETIC V-BLOCK WITH SWITCH, Hardened Magnetic V Blocks, Leak Proof Magnetic V Blocks, Magnetic Workholding Vee Blocks

Magnetic Vee Block Technology Data:

Part No: HSMB-V125
Applicable Dia: Φ125
Dimension:
L 150mm
W 50mm
H 100mm
A 100mm
Holding Magnetic Force: 23 kgf
Weight: 5 kg×2

Features:

Powerful magnetic force on all work surfaces, upper face, V-shaped faces, and base
V-Blocks are often used for inspection work. Please specify precision, or ultra-precision when ordering
On-Off switch for fast workholding and tear-downs

Accuracy for Squareness Flatness & Parallelism within 5 micron. ‘V’ Blocks are required for Quality Control, Tool Room and Standard Room. Magnetic ‘V’ Blocks have high magnetic pull, hence they can be used fro drilling and grinding (both wet and dry) and even for light milling work.

The Magnetic Vee Block – ‘V’ Block has a total three magnetic surfaces. Top and Bottom with 90 ‘V’ angle and end surface opposite to switch. All three magnetic surfaces and the two sides are carefully ground. Their accuracy for flatness, parallelism and squareness is within 0.005 mm for 2″, 3″, 4″ & 6″ ‘V’ Blocks. When turned “ON” all three magnetic surfaces are activated Simultaneously.

The permanent magnet holds the work firmly in the ‘V’ and if the block rests on a magnetically conductive surface, it is held firmly to this surface. The magnetic pull is constant and will not decrease eveb after long use. The magnetic system being shielded from penetration of moisture, cannot be damaged by coolants or other fluids.

Introducing for the first time in China special type Magnetic Vee Block. These ‘V’ blocks have been specially built for applications where heavy inspections are involved.
Its Advantages are as below:
1) Inspection area contains carbide tips so that, we get better life in the big ‘V’.
2) Efficiency of inspection increases considerably due to carbide in the Big ‘V’ over normal H.S.S ‘V’ blocks.
3) Accuracy is maintained for a longer period of time.