Magnetic Shuttering Solutions for Precast Concrete Formworks

Magnetic Shuttering Solutions for Precast Concrete Formworks, Precast Concrete Formwork  Magnet, Formwork Magnet, Magnetic Formwork System, Formwork System Magnet, Precast Concrete Shuttering Magnet

Magnetic shuttering solutions for precast concrete formworks!

The precast concrete industry has been searching for a more economical and efficient formwork method. In the past, some conventional magnets were used to position and fasten the formwork, but considerable mechanical loads with a hammer were required, which was easy to damage the magnets and the surface of the expensive formwork tables as well. In order to facilitate the formwork activities, HangSeng Magnetech is developing and manufacturing our own shuttering magnet to solve this problem successfully.

Our shuttering magnet provides quick operation leading to improved efficiency when setting out and breaking down the formwork. It consists of a switchable NdFeB magnet unit and a steel casing which forms a certain designed magnetic circuit. By pressing the button on top of the steel casing, this magnetic force is activated so that this magnet can fasten the formwork to the steel table tightly. In a deactivated mode, the magnet is easy to position. By means of two threaded holes integrated on the top, this magnet can be equipped with various adapters, which can provide unlimited options for use.

Characteristics
． Use with wood or steel formworks
． Easy to operate
． Simple and exact positioning
． Adhesive force ranging from 450 Kg to 2100 Kg
． Avoid welding or bolting to the formwork table therefore preserving surface finish
． Same magnet can be used for different purposes
． Intergrated threaded holes to adapt formwork
． Adapters to be custom made

If you would like some more help with construction, advice or smart solutions, don hesitate to give us a call The earlier the better. Call Us Today! 86-574-27667267 | EMAIL: info@hsmagnets.com

Magnetic Shuttering Concrete Magnet for plywood formwork , could used on concrete magnet for plywood formwork that for concrete buildings, the magnet box have a huge magnetic force that could hold the plywood formwork very tight to the concrete structure.The concrete magnet for wood formwork is made of big block neodymium magnet and steel,its structure is trimly welded and could concentrate the magnetic force to the bottom side.There are two hex nus on the top which is used to fix on steel structures.
How to use the Magnetic Shuttering concrete magnet for plywood formwork? Someone need to push the round handle button on the top, the magnet will sink and catch iron steel parts.After use the concrete magnet for plywood formwork,someone could use a crowbar tool to pry up the round handle button,and the magnet will return to a levitation situation and he could remove the plywood magnet box.Here to introduce some advantages of the concrete magnet, firstly, the concrete framing could be more trim as design, secondly, concrete construction could build more quickly and safely than bricks building,concrete magnet could make construction is even faster. Thirdly,construction company could prepare concrete framing walls when they have no works or tasks,and use concrete framing walls while task comes.
The Neodymium Magnet is a large block size, which offer a supper strong magnetic force that for holding the concrete formwork.
While operate the concrete magnet, hand contact under the neodymium magnet should be prohibited, it is dangerous when hand pinched with iron steel and magnet. The huge impact will crush someone’s bones. Precast Concrete Formwork Shuttering System