Magnetic Lifter 220LB 100KG Steel Metal Lifting Magnets, Magnet Crane Metal Lifting Tool, 220LB / 100KG Manual Magnetic Lifter for Scraps and Cast Iron PML-1, Portable Handheld Magnetic Lifting Equipment, Rare Earth NdFeB Magnetic Tool, Neodymium Iron Permanent Magnet Chuck Magnetic Spreader, Lift Magnet for Metal Lifting, Hoist, Shop Crane, Block, Board China Supplier Magnetic […]
Magnetic Pulleys, Magnetic Separation, Permanent Magnetic Pulleys, Head Pulley Magnet, Magnetic Drum Pulleys, Magnetic Head Roller China Supplier
Magnetic Separation Pulleys replace existing head pulleys in belt conveyors. They are used for continuously separating ferrous contaminants from the product flow at the point of discharge.
The radial magnetic field ensures the tramp metal is held and separated from the product as it flows off the end of the conveyor. Can be used stand-alone or in conjunction with a matching Magnetic Take-off Rail which carries the ferrous material further back away from the pulley before release.
Available in a range of sizes to fit your diameter and belt width.
The shaft can be machined to your specification.
Magnetic pulleys always are placed at the head of conveyor belt to separate iron particle, iron scrap, tramp iron and other ferromagnetic objects from more bulk dry material flow such as iron ore, grain, sand, gravel, plastics, wood, waste, cullet, rubber, etc.
Principle of Operation
HSMAG Magnetic Pulleys are widely used as head pulleys in belt conveyors for continuous automatic removal of damaging tramp iron from a variety of materials.
As illustrated in Figure 1, tramp–iron contaminated material comes within the pulley’s magnetic field, the tramp iron is attracted and held to the belt until it reaches the underside, passes out of the magnetic field, and is separately discharged. The cleaned, nonmagnetic material is discharged over the pulley in a normal trajectory.
A stainless steel splitter assembly is required to separate segmented material fractions. An adjustable splitter will permit separation fine tuning and provide optimum separation performance for your application.
1.Can be produced with cost saving ferrite magnets, also can be produced with powerful rare earth magnets if needed The maximum magnetic strength can reach 15000Gs
2.Surface material is 304 or 316L stainless steel, good corrosion resistance and n pollution.
3.No electric power required for magnetic field generation;
4.Form automatic separation system together working with belt.
5.Special requirment can be custom made.
HSMAG provides a uniform permanent magnetic pulley that will transform your belt conveyor into a powerful self cleaning magnetic separator. The axial interpole magnetic circuit provides a uniform magnetic field to remove tramp iron from material on almost any belt conveyor. Magnetic Chute
HSMAG Magnetic Pulleys provide ideal automatic removal of unwanted iron from materials conveyed on belts to prevent machinery damage and product contamination for sand, gravel, limestone, recyclables, wood products, food, chemical, mining, rock products, ceramic, paper, plastic, rubber, coal handling and foundry operations.
Powerful and reliable
Prevents machinery damage and product contamination
Automatic separation of heavy tramp iron from conveyor transported materials
For more infomantion, Please Contact us : Call 86-574-27667267 / EMAIL firstname.lastname@example.org
|PART NO||Dia A (mm)||B (mm)||DiaD (mm)||DiaC (mm)||Weight(Kg)|