Standard Mag Drills HS-MD32, Manual Feed Mag Drills, Standard Magnetic Drills, Ultra Low Profile Mag Drills, Hydraulic Powered Mag Drills, Nitto Kohki Mag Drills, Hougen Mag Drills, Jancy Mag Drills Manual Feed Mag Drills Press Features: Part No.: HS-MD32 Cutter Capacity : Diameter 12-32mm Twist Drill : Diameter 3-16mm Max.Drilling depth : 60mm Spindle holder: Diameter 19.05mm […]
Magnetic Drilling Machine, Power Feed Magnetic Drill, Adjustable Position Base Magnetic Drill Press, Magnetic Drill Presser with Reverse Switch, Portable Magnetic Drilling Machines, Mag Drill, Magnetic Drilling System, Typhoon Magnetic Drill Roto-Broach
Magnetic Drilling Machine Features:
Part No.: HS-MD80
Cutter capacity : Diameter 12-80mm
Twist Drill : Diameter 1.5-31.75mm
Max.Drilling depth : 70mm
Spindle holder : Diameter 31.75mm（11/4″）WELDEN
No load speed : （Ⅰ）450r/min（Ⅱ）135r/min
Electric Dat : 220～230V/50Hz/1800W
Magnetic Force : 20000N
Magnet Size : 220×104×64mm
Stroke : 260mm
Net Weight : 27kg
Package size : 41×22.5mm×55cm
Types of Mag Drills:
Manual Feed Mag Drills – the most common mag drills are manual feed. These require the operator to feed the cutter through the metal manually.
Auto Feed Mag Drills – These drills feed and return to the start position automatically, enabling the operator to press Start and run several automatic mag drills at one time!
The load sensing system in these auto-feed mag drills provides for faster cutting times; automatically adjusting the feed rate, and providing longer cutter life while eliminating the stress on motor due to improper operator pressure.
Other Special Application Magnetic Drills:
Ultra Low Profile Mag Drills – Generally low profile mag drills are used to drill truck frames and other tight spaces.
Hydraulic Powered Mag Drills – Hydraulic powered mag drills are used for underwater applications or in spark free environments
Twist Drill Adapter
Allowing the operator to us jobber drills from 1/2″ diameter and smaller with mag drills.
These kits allow the operator to quickly and easily counter sink for flat head bolts.
As the name implies, this device is geared to tap steel. If your production requires tapping, make sure the mag drill you select will tap the size you need. Not all mag drills can reach up to 1-1/8; however, most can tap up to 3/4″.
This accessory allows the operator to mount the mag drill on pipe and drill holes on center. The minimum pipe diameter is usually 3 & maximum is 12 ; larger sizes may be available based on the manufacturer.
Mag Drill Vac Pads
Allows the mag drill to be attached to non-ferrous metals with the use of shop air.