LED Work Light Flexible Magnetic Base for Flashlight, Magnetic Flashlight Mounting Brackets Holders with Strong Magnetic Round Base and With Flexible Adjustable Clips Suitable for Flashlight Diameter from 0.6″ to 1.6″ – No Flashlight, Rubber Magnetic Flashlight Weapon Mount, Magnetic Hook Round Base Magnet Fastener, Magnetic Tool Accessories, China Supplier Factory LED Work Light Flexible […]
Injection Moulding Water Flowmeter Magnet, Injection Molded Ferrite Magnetic Assemblies, Bonded Rare Earth magnet materials such as NdFeB, SmCo and SmFeN can molded as well as Ferrite material, Injection Molded Permanent Magnets, Isotropic and Anisotropic grades Permanent Plastic ferrite bonded magnet, injection bonding magnet, Magnetic Assembly Supplier
Injection Moulding Water Flowmeter Magnet Part No. HSIMM-05
Material: injection-molded ferrite
Number of magnetizing poles: radial multipole 6 poles
Purpose: flow sensor, water flowmete
The product name is water flowmeter magnet, flow sensor magnet, flow sensor rotor. The magnetization mode is radial multipole. If you are interested in this product, please contact by email.
Injection Magnet Plastic Magnet What is Injection Moulding
Magnet material can be directly molded into, onto, or against other assembly components eliminating subsequent assembly steps. This is called insert injection molding.
Injection molded magnets are available by using ferrite, neodymium-iron-boron, or blends of magnetic materials to achieve an extensive range of properties. Binder materials include Nylon 6 and 12, PPS, and Polyamide. The binders and magnetic alloys are capable of a wide range of working temperatures from below -40°C to above 180°C. The Injection molding process allows the ability to produce very intricately shaped magnets with extremely tight tolerances and a wide variety of physical and magnetic characteristics. The finished parts can be either very simple or complex in geometry.
The properties of injection molded magnets vary greatly, depending on the type of magnetic material and binder utilized. GME has both Neodymium and Hard Ferrite injection molding capability, and it is also possible to utilize a blend of different magnetic material to produce the desired properties. Several types of binder can be employed depending on the application, and we offer a variety of nylon and PPS grades to suit the specific needs of our customers.
Benefits of Injection-Molded Ferrite:
Ideal for large production runs
May be molded into complex shapes
May be molded onto shafts or to be attached to other components
Tolerances as tight as 0.01 mm
Impact and chemical resistance
Energy products to 16 kj/m3
Isotropic and Anisotropic grades
Neodymium hybrids can increase performances
Plastic Magnetic Rotor for Automobile Water Pump Motor
Project of Injection Magnets
In most motor control systems, several sensors are used to provide feedback information on the motor. These sensors are used in the control loop and to improve the reliability by detecting fault conditions that may damage the motor. Automobile Water Pump Rotor Magnet Injection Moulding
Higher Magnetic Strength due to higher magnetic particle density.
Epoxy Binder / Resistant to normal industrial solvents and automotive fluids
Epoxy Coat after manufacturing to prevent oxidation PET Injection Molded Plastic Magnet for Door Locks
Temperature Range -40c ~165c
“Tight” tolerances off tool
Good mechanical strength Plastic Magnetic Rotor for Automobile Water Pump Motor
Typical Bonded Magnet Applications:
Brushless DC Motors
General Bonded Magnet Applications:
Materials are isotropic and can be magnetized in any direction
Wide range of existing tool sizes are available in rings, discs and rectangles
Exsisting Multipole magnetizing fixtures for quick prototyping
Existing Multipole rings simplify assembly verse arc sepments
If you have any interest or inquiries for Neodymium(NdFeB) magnet, you are welcomed to inquire here. We are sure you will be satisfied with our price and service.