Ndfeb Neodymium Coupling Magnets for Oil Air Fluid, Pump Magnetic Coupling, Drive Shaft Magnetic Coupling For Reactor Agitator Pump, High-Performance Magnetic Transmission Component, Disc Type Magnetic Couplings with Bearing, Co-Axial Type Coupling, Rare Earth Permanent Magnetic Couplings, magnetic systems, Torque Permanent Motor Magnetic Coupling connect gear pumps, electric motor or gear box China Supplier Ndfeb […]
PET Injection Molded Plastic Magnet for Door Locks, Injection Molded Ferrite Magnets, Bonded Rare Earth magnet materials such as NdFeB, SmCo and SmFeN can molded as well as Ferrite material, Injection Molded Permanent Magnets, Isotropic and Anisotropic grades Permanent Plastic ferrite bonded magnet, injection bonding magnet, Magnetic Assemblies Supplier
PET Injection Molded Plastic Magnet for Door Locks Part No. HSIMM-03
Material: injection-molded ferrite
Number of magnetizing poles: radial 4 poles
Purpose: Door Locks
1. Material: anisotropic ferrite powder
2. Grade: DMS121-A, DMS121-B, DMS121-C, DMS121-D, DMS121-E, DMS-121-F, DMS121-H, DMS121-J, DMS121-T, DMS221-A, TP-S62, TP-S65, TP-S67K, TP-A27E, TP-S76.
3. Shape: ring, rotor.
4. Dimension: customized dimension
5. Application: It’s widely used in micro-motors, car seats, skylights, wipers, automatic control, instruments & meters and so on.
Competitive price, good service, good quality will be for you.
It has excellent resistance to alcohol, abluent and water.
Injection molded magnets are available using ferrite, neodymium-iron-boron, or blends of magnetic materials to achieve an extensive range of properties. Binder types include Nylon 6 and 12, PPS, and Polyamide. The binders and magnetic alloys are capable of a wide range of application temperatures from below -40° C to above 180° C. The Injection molding process is particularly well suited to molding very intricate shapes and thin walled parts. The finished parts can be either very simple or complex in geometry.
Benefits of Injection-Molded Ferrite:
Ideal for large production runs
May be molded into complex shapes
May be molded onto shafts or to be attached to other components
Tolerances as tight as 0.01 mm
Impact and chemical resistance
Energy products to 16 kj/m3
Isotropic and Anisotropic grades
Neodymium hybrids can increase performances
Higher Magnetic Strength due to higher magnetic particle density.
Epoxy Binder / Resistant to normal industrial solvents and automotive fluids
Epoxy Coat after manufacturing to prevent oxidation
Temperature Range -40c ~165c
“Tight” tolerances off tool
Good mechanical strength
Typical Bonded Magnet Applications:
Brushless DC Motors
General Bonded Magnet Applications:
Materials are isotropic and can be magnetized in any direction
Wide range of existing tool sizes are available in rings, discs and rectangles
Exsisting Multipole magnetizing fixtures for quick prototyping
Existing Multipole rings simplify assembly verse arc sepments
If you have any interest or inquiries for Neodymium(NdFeB) magnet, you are welcomed to inquire here. We are sure you will be satisfied with our price and service. Rubber Coated Marine Magnet Retrieval Ring
Counterbore Plastic Magnetic Ring Magnets