Call Us Today! 86-15990205383, 86-574-87562591

Injection Ferrite Flow Sensor Magnets For Water Heater

/Injection Ferrite Flow Sensor Magnets For Water Heater
  • Injection Ferrite Flow Sensor Magnets For Water Heater

Injection Ferrite Flow Sensor Magnets For Water Heater, Water Flow Sensor Magnets, Water Flowmeter Switch Magnet, Injection Molded Ferrite Magnetic Assemblies, Bonded Rare Earth magnet materials, Injection Molded Permanent Magnets, Isotropic and Anisotropic Permanent Plastic ferrite bonded magnet, Magnetic Assembly China Supplier

Injection Ferrite Flow Sensor Magnets For Water Heater Part No. HSIMM-17
Material: injection-molded ferrite
Number of magnetizing poles: radial multipole 4 poles
Purpose: flow sensor, water flowmeter

This specification defines the dimensional and magnetic properties of a multipole magnetic ring for sensor applications.
Injection Ferrite Flow Sensor Magnets Diametrial 4 Poles
Material: Plastic bonded Ferrite magnets
Magnet Shape: Ring
Magnet Size: customized
Magnetization: Diametrial 4 Poles
This specification defines the dimensional and magnetic properties of a multipole magnetic ring for sensor applications.

The product name is water flowmeter magnet, flow sensor magnet, flow sensor rotor. The magnetization mode is radial multipole. If you are interested in this product, please contact by email.

Water Flow Sensor Magnets
Water flow sensor is a type of water flow induction instrument which output pulse, current or voltage signal through induction to the water flow. The output of the signal has a certain linearly proportional to the water flow. Thus can be served to the management of water control and flow calculation depend on the relevant conversation formula and comparison curve. Actually, as a core component of water flow sensor, water flow sensor magnets have long been a typical application of injection molded ferrite magnet.

Working Principle of Water Flow Sensor
Water flow sensor is mainly composed of copper valve body, water flow rotor assembly, steady flow system and hall component. Water flow sensor is usually installed on the inlet of the heater to measure influent flow, and magnetic rotor assembly rotates when water flow through it. Hall component output and feedback corresponding pulse signal to controller, then controller adjust current of proportional valve and hence gas usage according to the flow rate.

Water flow rotor assembly mainly consists of turbine switch housing, magnetic rotor, and brake ring. Water flow sensor magnets are essentially a hall effect sensor magnet. Hall component will conduct when different magnetic poles toward it, then cut off once away.

Injection Bonded Ferrite Magnets are a combination of good magnetic strength and strong physical properties. The magnets can be easily manufactured on a large scale with close dimensional tolerances and need no finishing operations, thus saving costs. Ashvini Magnets offers a range of injection bonded ferrite magnets that are recognised for high durability and utility. The magnets can be manufactured as per design or custom designed to suit the applications. 4 Poles High Precision Water Flowmeter Sensor Magnet, Multipole 2 Poles Magnetic Water Flow Switch Magnet

Bonded Ferrite is injection molded using Nylon 6, Nylon 12 and PPS which can be easily aligned in the mold to achieve higher magnetic properties and custom waveforms. Water Flow Switch Magnet Diametrial 4 Poles

A flow switch, sometimes referred to as a flow sensor or flow indicator, is a device used to monitor the flow rate and pressure of liquids, air or other gaseous media through a duct, system or loop. Water Heater Rotor Magnet Injection Molding

These switches or sensors can be used to monitor flow over a given period of time, or set up to continuously monitor total flow. Technically, a flow meter or indicator may not necessarily be a true flow ‘switch’ – if the device only registers and displays information, it’s more properly called a meter or indicator. Plastic Injection Bonded Ferrite Magnet for Water Pump

In most cases, though, they’ll be able to trigger actions or stop/start other components elsewhere in the system – pumps, for example – in order to adjust flow rate and pressure to the desired and programmed levels. This is then a true flow switch.

Magnetic water flow switch
Low cost flow switch.
Long life, excellent performance flow sensor.
No Standby power requirement.
Excellent performance.

  • Customized is Available
  • Affordable price
  • Quality guaranteed
  • T/T or L/C accepted
  • Other payment accepted
  • Fast shipping, Worldwide delivery
  • 24-Hours excellent customer service
  • Offer free magnetic solution
  • Bulk discounts for larger orders

Product Range

error: Content is protected !!