Red Cast Horseshoe Alnico C-Shape Magnet, AlNiCo U Magnet with N & S Indication, C-shaped U shape Horseshoe Alnico Magnets for Education Physics Experiment Teaching, U-Type Alnico Educational Magnets for Teacher, Al-Ni-Co Horse Shoe Magnet, Industrial Grade Alnico Power Magnet with keeper, Red and Blue Pianted Horseshoe Magnet Supplier Red Cast Horseshoe Alnico C-Shape Magnet […]
Countersunk SmCo Magnets, Disc Samarium Cobalt Magnets with Countersunk Hole, Sintered SmCo Discs with Central Holes, Sm2Co17 Magnet, Rare Earth SmCo Countersunk Ring Permanent Magnets China Wholesaler Exporter
Countersunk SmCo Magnets – Samarium Cobalt SmCo is the alternative Rare Earth magnet. It is often used in aerospace, automotive and military applications. It is usually weaker than NdFeB Neodymium at room temperature.
Samarium Cobalt SmCo is capable of use in extremes of cold and heat. It also has very high coercivity making it ideal for high temperature motor applications.
Samarium Cobalt also has extremely good temperature coefficients making the magnet output very stable with small changes in temperature. It is very popular in mission critical sensing applications.
Samarium Cobalt, SmCo, is the alternative Rare Earth magnet to Neodymium.
SmCo has better temperature coefficients than Neodymium allowing less variation in magnetic output over temperature fluctuations. SmCo outperforms Neodymium at temperatures above +150°C (with an upper limit of +350°C) and can be used at temperatures nearly as low as absolute zero (-273°C).
SmCo is a great choice for applications where high temperatures exist and where high external demagnetising forces exist, such as in motors and generators.
Where Alnico cannot be used, SmCo is also a superb choice for temperature sensitive applications such as sensors where a stable magnetic field is required. It is used in aerospace, automotive and military applications.
SmCo offers excellent corrosion resistance to water due to little free iron being present in its structure. However, SmCo is a brittle material and could break, chip, snap or possibly even shatter if mishandled. Care should be taken when using SmCo (e.g. wear safety glasses).
The block SmCo magnets can be made to have straight through holes or countersunk holes. These ring magnets have higher permeance coefficients compared to disc magnets are the same outer dimensions. The magnetic pole on the countersunk face is stated because, when applying the rule of unlike Poles attract, a South countersunk face magnet will attract only to a North countersunk faced magnet (although any countersunk ring magnet can be used to attract to mild steel).
If you cannot find the dimensions you require, please get in touch. The standard manufacturing tolerance is +/- 0.1mm on all dimensions.