Ndfeb Neodymium Coupling Magnets for Oil Air Fluid, Pump Magnetic Coupling, Drive Shaft Magnetic Coupling For Reactor Agitator Pump, High-Performance Magnetic Transmission Component, Disc Type Magnetic Couplings with Bearing, Co-Axial Type Coupling, Rare Earth Permanent Magnetic Couplings, magnetic systems, Torque Permanent Motor Magnetic Coupling connect gear pumps, electric motor or gear box China Supplier Ndfeb […]
Counterbore Plastic Magnetic Ring Magnets, Ring Injection Molded Ferrite Magnets, Bonded Ferrite Magnets for Air Conditioner, Injection Molded Permanent Magnets, Permanent Plastic ferrite bonded magnet, injection bonding magnet, Magnetic Assemblies Supplier
Counterbore Plastic Magnetic Ring Magnets Part No. HSIMM-01
Material: injection-molded ferrite
Number of magnetizing poles: radial 6 poles
Purpose: Motor motor
This product is an injection-molded magnet. It is one of our main magnet products. It is mainly made of ferrite powder (or neodymium iron boron magnetic powder) and plastics and other materials, which are made by injection molding process, with high dimensional accuracy. It is a functional magnet with complex shape, multi-pole magnetization, good toughness and can be embedded in metal and plastic parts. The magnetism is equivalent to that of heterogeneous ferrite, but there are many characteristics that are superior to ferrite in practical applications, so the application is also very wide.
Injection molded magnets are available using ferrite, neodymium-iron-boron, or blends of magnetic materials to achieve an extensive range of properties. Binder types include Nylon 6 and 12, PPS, and Polyamide. The binders and magnetic alloys are capable of a wide range of application temperatures from below -40° C to above 180° C. The Injection molding process is particularly well suited to molding very intricate shapes and thin walled parts. The finished parts can be either very simple or complex in geometry.
Magnetic materials can be insert injection molded directly inside or against an existing component to produce assembly pieces. Injection molded magnets dimensionally conform to mold cavities, which are precisely machined, resulting in finished products which usually do not require further finishing operations. This eliminates subsequent operations and reduces total cost. Permanent Injection Molded Magnets for Brushless DC Motor
Binder Types / Nylon / PPS / Polyamide.
Temperature Range -40c 180c
Very Tight tolerances off tool ( 0.002 -0.003 Typical )
Very good mechanical strength
Higher Magnetic Strength due to higher magnetic particle density.
Epoxy Binder / Resistant to normal industrial solvents and automotive fluids
Epoxy Coat after manufacturing to prevent oxidation
Temperature Range -40c ~165c
“Tight” tolerances off tool
Good mechanical strength
Typical Bonded Magnet Applications:
Brushless DC Motors
General Bonded Magnet Applications:
Materials are isotropic and can be magnetized in any direction
Wide range of existing tool sizes are available in rings, discs and rectangles
Exsisting Multipole magnetizing fixtures for quick prototyping
Existing Multipole rings simplify assembly verse arc sepments
If you have any interest or inquiries for Neodymium(NdFeB) magnet, you are welcomed to inquire here. We are sure you will be satisfied with our price and service. Rubber Coated Marine Magnet Retrieval Ring
Retail Pop Clip Sign Holder with Magnet Base for Supermarket