China Permanent Magnetic Couplings in Corrosion-resistant Materials

China permanent magnetic couplings in corrosion-resistant materials, General Type Magnetic Coupling for Magnetic Pumps, Permanent Magnet Couplings for Pump, Rare Earth Permanent Magnetic Coupling, Torque Magnetic Coupling, Linear Magnetic Couplings, Coaxial, Face to Face, Tubular, Planar China Supplier Factory

China permanent magnetic couplings in corrosion-resistant materials  Item No. HSKMCS series

Permanent magnet coupling can be defined as a non-contact type of mechanical device utilized for transmitting a certain level of rotational torque with the use of magnetic force. It helps in the transfer of torque from a driving shaft, primarily fixed on an electric motor, without the interaction of the two shafts.

Unlike the usual couplings that have transmission by friction, gears, and/or flexibility, the permanent magnet coupling uses magnetic fields that are produced by permanent magnet. These magnetic fields transcend the air gap normally present or the other containment barrier that links the two shafts. There is total elimination of mechanical wear at the coupling.

From an engineering perspective, this design eliminates one of the largest failure modes in a rotating assembly. Traditionally, in a mechanical seal, as well as a contact type coupling, wear, leakage, or misalignment are critical concerns; in a PMC, none of these concerns exist.

These couplings, permanently magnetic in nature, find their most popular usages in pumping equipment, mixers, compressors, and agitators. They have their highest value when the working fluids have characteristics such as corrosive, poisonous, inflammable, and highly purified. It is to be noted that even small amounts of leakage always create a major problem.

Another factor that defines permanent magnet couplings is the shaft isolation. The shaft may either be completely isolated with the non-magnetic containment shell. In most permanent magnet couplings, no dynamic seals are required.

Permanent magnetic couplings are not just a part of the mechanical system from the buyer’s point of view; they are used as solutions to the question of reliability that can lower costs in the long run while providing a safe system that runs effectively with lower initial costs. Even though they have a very high initial cost, most people would attest that the investment was well worth it in the end.

Outer rotor: Magnetic steel electroplating NI treatment, external spray painting, generally made of Q235 material to achieve the purpose of magnetic isolation.  Neodymium Magnetized Water Softener for Hardness Removal Heating System

Co-creative Development with
Ensured Manufacturability.
Sintex a/s is a specialist in the production of permanent magnetic couplings in corrosion-resistant materials. We have always focused on providing maintenance-free solutions with unique advantages – both compared to mechanical solutions and other magnetic solutions.

Our couplings are used within, for example, the pump industry, the pharmaceutical industry, the chemical industry, the biotechnical industry and the food industry – usually with application in:
Submersible pumps
Circulation pumps
Household pumps
Wastewater pumps
Industrial pumps
Liquid systems
Mixers and agitators
Hydraulic and process technology