Personal Security Products QuickDraw Gun Magnet, Custom Gun Magnet Moutnt Holder for Handguns, Rifles, Shotguns, Pistols, Revolvers, Concealment Gun Storage Magnet, Magnetic Pistol Magnet Mount Holster, Rubber Coated Magnetic Gun Tool Holder Rack, Concealed Gun Handgun Piostol Mounting Magnet, Custom Gun Magnets China Supper Factory Personal Security Products QuickDraw Gun Magnet Characteristic: Part No.: HSMGM-07 […]
Channel Assembly Ferrite Magnet, Ceramic Magnetic Bar Channel Assembly, Block Ferrite Channel Magnet, Ferrite Latch Magnet Assemblies, Channel Magnetic Bar Holder
Channel Assembly Ferrite Magnet Feature:
Part No.: HSCM-C09
Material: Rectangular Iron Shell, Ceramic/ Ferrite Magnets
Ceramic Magnet Grade: C8
Surface Treatment: NiCuNi Plating or Zinc-plated
Size: 304.8mm x 38.1mm x 11.6mm with two holes (12.000″ x 1.500″ x 0.455″)
Force Pull (LBS): 110
Fixing: 4mm Screws
Max Working Temperature: 180℃ or as per needs
110lbs. maximum pull from the magnetic surface when in flush contact with a mild steel surface of equal thickness to the magnet
Innovative rectangular design with steel casing which greatly increases performance
The magnet’s north pole is on the centre of the magnet’s face with the south pole on the outer edge meaning both poles are on the same face
Ferrite (Y30BH) steel-cased channel magnet with central fixing hole
Resistant to corrosion so no extra coating required
Channel Assembly magnets use a steel channel along with ceramic block magnets to create a powerful magnetic field on the open side of the channel. These magnets are perfect as tool racks, guides, hold downs on flat steel surfaces.
Channel magnets are rectangular in shape and consist of a steel shell with a block ferrite magnet into one face.
Magnetism is confined to one face only, where it is concentrated to give the maximum holding force possible for the size of the magnet. The steel shell significantly increases the clamping force of the assembly making them excellent value for money. Channel magnets are supplied with a plain hole for convenient mounting located in the middle of the magnet or at either end depending on the size.
Channel magnets do not chip or crack with constant impacting onto a steel surface which is another large advantage. Channel magnets can be used in guides for letterpress printing and commercial sewing.
|Part No.||L(mm)||W(mm)||H(mm)||Dimensions (inch)||Pull Force(LBS.)|
|HSCM-C06||203.2||26.7||11.5||8.000″ x 1.050″ x 0.455″||60|
|HSCM-C07||152.4||38.1||12.1||6.000″ x 1.500″ x 0.475″||100|
|HSCM-C08||304.8||43.7||15.7||12.000″ x 1.720″ x 0.620″||150|
|HSCM-C09||304.8||38.1||11.6||12.000″ x 1.500″ x 0.455″||110|
|HSCM-C010||375.9||34.9||15.9||14.800″ x 1.375″ x 0.625″||175|
|HSCM-C011||666.8||31.8||14.3||26.250″ x 1.250″ x 0.562″||325|
|HSCM-C012||76||31.8||12.7||3.000″ x 1.250″ x 0.500″||30|