Alnico Multipole Magnets, Alnico Magnetic Rotor Assemblies, Motor Multipole Alnico Rotor Permanent Magnets, alnico 5 rotor cast alnico magnet for holding and magnetic motors, Custom Alnico Assemblies Supplier Alnico Multipole magnets are designed with multiple poles; each pole alternates in polarity. The hole in the rotor is designed for mounting onto shafts. They are excellent for use in synchronous motors, […]
Alnico Power Magnets, Large Power Magnets with keeper, Heavy-Duty Horseshoe Alnico Power Magnets, Alnico Horseshoes Minor Power Magnets, Red Bridge Magnet, Horseshoe Alnico Retrieving Permanent Magnet
Alnico Power Magnets (no hole / one hole / two holes) are powerful and durable horseshoe magnets manufactured from Alnico 5.
They give a high performance through a range of airgaps and high temperatures. A high level of
stability,corrosion resistance and temperature resistance.
Ideal for retrieving parts from hot and corrosive liquids.
Maximum operating temperature:500 deg.C
Ideal for retrieving ferrous material from high temperature salt baths,plating vats or oil quenching.
Note: Holding force is measured subject to the following conditions:
The magnet is magnetised to saturation
The object to be held should be a solid piece of a FerroMagnetic material (such as a mild steel block) of sufficient thickness so that it does not attain saturation during this operation. It must not be in the form of very thin sheet or loose particles.
There is close contact between the magnet poles and the surface of the object.
If you are in any doubt about the choice of Alnico magnet, its size or need technical assistance, please contact us for assistance. And if you need a quotation for higher quantities of Alnico or a custom Alnico magnet shape or Alnico assembly, please simply give us a call at 86-574-27667267 or Email:firstname.lastname@example.org.
|Part No.||Length (mm)||Length (in)||Width (mm)||Height (mm)||Width of Gap (mm)||Hole Size||Hole Centres||Weight (kg)||Weight per Pair (kg)||Pull Force (kg)|
|APM-814||57||2.283||44.5||35||27.8||2 X 7.9||31.75||0.37||0.37||23.5|
|APM-816||79.4||2.756||82.6||54||38.1||2 X 9.5||42.86||1.45||1.45||47|
|APM-815||70||3.125||57.2||41.3||34.1||2 X 7.9||38.1||0.71||0.71||37|