Alnico Multipole Magnets, Alnico Magnetic Rotor Assemblies, Motor Multipole Alnico Rotor Permanent Magnets, alnico 5 rotor cast alnico magnet for holding and magnetic motors, Custom Alnico Assemblies Supplier Alnico Multipole magnets are designed with multiple poles; each pole alternates in polarity. The hole in the rotor is designed for mounting onto shafts. They are excellent for use in synchronous motors, […]
ALNICO 5 Rod Cylinder Magnets Vintage Top Style, Alnico V Guitar Magnets, Guitar Pickup Magnets (Imperial) – Polished, ALNICO 5 Rod Bluk Vintage Stagger Magnets ( 0.187″, 0.195″, 0.250″)
HS-GPAR-5 with vintage beveled top Fueature:
* Permanent Magnet Merial:
AlNiCo 5 / Alnico V / A5
0.187 in / 0.195 in / 0.250 in
0.471 in 0.630 in 0.650 in 0.665 in. 0.671 in 0.688 in 0.693 in. 0.710 in 0.719 in. 0.780 in
* Magnetizing Options:
Do Not Magnetize / North Up / South Up
Alnico 5 produces a brighter tone with a tighter low end and stinging highs. They’re great for neck position pickups, to help keep the tone clear without getting muddy.
Alnico 5, the most widely used grade, can usually be depended upon to deliver energy to a magnetic circuit more economically than any of the other Alnico grades. Magnetic saturation at the end-use location requires the application of a magnetizing force 4 to 5 times greater than the coercive force of the material. For Alnico 5, 3000 oersteds(240 KA/M) are recommended. Coating/plating is not normally applied because material is inherent corrosion resistant. Alnico also boasts the lowest temperature coefficient of any commercial magnet material (0.02% per degree centigrade) allowing for excellent stability over a wide temperature range. Alnico 4 and 5 – Guitar Magnets are now available in the grades and sizes listed below. If you require amounts larger, please contact us at firstname.lastname@example.org.
|Part No.||Magnet Merial||Dimensions in Inches||Magnetizing||Top Style|
|HS-GPAR-2||AlNiCo 2||0.187 / 0.195||0.471 / 0.630 / 0.650 / 0.665 / 0.671 / 0.688 / 0.693 / 0.710 / 0.719 / 0.780||Not Magnetize / North Up / South Up||Flat / Vintage|
|HS-GPAR-3||AlNiCo 3||0.187 / 0.195||Not Magnetize / North Up / South Up||Flat / Vintage|
|HS-GPAR-5||AlNiCo 5||0.187 / 0.195 / 0.250||Not Magnetize / North Up / South Up||Flat / Vintage / Modern|
|HS-GPAR-8||AlNiCo 8||0.187 / 0.195||Not Magnetize / North Up / South Up||Flat|
HS-GPAR-4 : AlNiCo 4 also be supplied.