Super Strong Magnetic Lock with LED & Time, Super Strong Electromagnetic Lock, 1500lbs Single Door Magnetic Lock with Signal Output & Time Delay, LED and Time Single Door Electromagnetic Lock, 750kg Magnetic Lock Super Strong Magnetic Lock with LED & Time HS-EML-750T(LED) single door magnetic lock is for heavy door, such as metal door, wooden door, fireproof door, sliding door and so on. Inbuilt […]
1200lbs Single Door Magnetic Locking, Single Door Electric Magnetic Locking, Single Door Magnetic Lock with Signal Output, Time Delay & Buzzer (Buzzer), 500kg Holding Force Electric Locking, Standard Electromagnetic Locks, Single Door Unmonitored Electromagnetic Locking
Single Door Magnetic Locking 1200LBS HODING FORCE PAT NO.: HS-EML-500BZ single door magnetic lock with buzzer, signal out put and time delay, is suitable for wooden door, fireproof door, sliding door and metal door, etc. When set up 1-30 as door close time, if the door doesn’t close after 30secs, it will alarm till the door close.
Inbuilt dry contacts lock status signal output ( NO,NC,COM) to monitor whether the lock is locked, Led indicates the door lock status.
Accessories for inswing door,frameless glass door,narrow doorframe door etc are available.
Special anti-residual magnetism design makes the access control automation safer and magnetic lock more durable.
1200lbs Single Door Magnetic Locking Advantages:
Collinear Load Test 500kg,1200pounds.
Dual Voltage 12 or 24 VDC (optional).
The Standard Voltage is 12VDC when Finished.
MOV Provides Reverse Current Protection.
Suitable For Wooden Door, Glass Door, Metal Door, Fireproof Door, etc.
LED Indicates the Door Status.
Lock Status sensor (NO/NC/COM).
Time: 0/3/6/9 sec.
Anti-Residual Magnetism Designed.
High Strength Material, Anodized Aluminum Housing.
Design without Mechanical Failure.
Increase the holding Force, Dual Insulative Housing.
1200lbs Single Door Magnetic Locking Technical parameters:
Part No: HS-EML-500BZ
Armature plate 185Lx60Wx13H(mm)
Holding Force 500kg(1200Lbs)
Voltage 12 or 24VDC
Current Draw 12V/420mA or 24V/210mA
Signal Output Dry Contact,Max Rating of Contact Current 3A
LED Red indicates the door is unlock,Green indicates the door is lock
Suitable for Wooden door , Glass door ,Metal door , Fireproof door
Surface Temp ≤+20℃
Operating Temp -10～+55℃(14-131F)
Suitable Humidity 0~95%(non-condensing)
Finishes for Shell Anodized aluminum
Finishes for Magnetic Zinc
Finishes for Armature Zinc
Packing Quantity(PCS/CTN) 4
Packing Size(L*W*H)(cm) 58*18.8*9.2
Gross Weight(KG) 17.36
The magnetic lock is suitable for both in-swinging and out-swinging doors. Brackets (L bracket, LZ bracket, U bracket) are used to orient the armature for use with both applications. Filler plates are also used to provide a large, flat mounting area on the door frame when the electromagnet is larger than the available mounting space on the door frame due to the frame’s geometry.
The magnetic lock should always be installed on the secure side of the door. Most installations are surface mounted. For safety, magnetic lock, cables, and wires should be routed through the door frame or flush mount with wire moulding.
Installation is straightforward. With in-swinging applications, the electromagnet is typically installed in the opening corner of the door at the door’s header. Maglocks can also be installed vertically in the door opening when they are furnished with a full length housing. With this configuration the armature is through-bolted through the door and oriented to mate with the face of the electromagnet. The armature plate and electromagnet must touch in order to provide locking holding force.
With out-swinging applications, the electromagnet is typically installed on the side of the door header. In this configuration, the armature is mounted on a Z shaped bracket that orients the armature to mate with the electromagnet.