Super Strong Magnetic Lock with LED & Time, Super Strong Electromagnetic Lock, 1500lbs Single Door Magnetic Lock with Signal Output & Time Delay, LED and Time Single Door Electromagnetic Lock, 750kg Magnetic Lock Super Strong Magnetic Lock with LED & Time HS-EML-750T(LED) single door magnetic lock is for heavy door, such as metal door, wooden door, fireproof door, sliding door and so on. Inbuilt […]
1200lbs Double Door Electric Locking, Electromagnetic Door Locking, Magnetic Lock 500KG*2 Holding Force Access Control, Electric Magnetic Locking, Double Monitored Electromagnetic Locks
Electric Locking 1200lbs HOLDING FORCE HS-EML-500D(LED) Double door magnetic lock is for heavy door, such as wooden door, fireproof door, sliding door and metal door.
Inbuilt dry contacts lock status signal output ( NO,NC,COM) to monitor whether the lock is locked, Led indicates the door lock status.
Accessories for inswing door,frameless glass door,narrow doorframe door etc are available.
Special anti-residual magnetism design makes the access control automation safer and magnetic lock more durable.
Magnetic Lock Advantages:
Collinear Load Test 500x2kg,1200x2pounds.
Dual Voltage 12 or 24 VDC (optional).
The Standard Voltage is 12VDC when Finished.
MOV Provides Reverse Current Protection.
Suitable For Wooden Door, Glass Door, Metal Door, Fireproof Door etc
LED Indicates the Door Status.
Lock Status sensor (NO/NC/COM).
Anti-Residual Magnetism Designed.
High Strength Material, Anodized Aluminum Housing.
Design without Mechanical Failure.
Increase the holding Force, Dual Insulative Housing.
Magnetic Lock Technical parameters:
Part No.: HS-EML-500D(LED)
Armature plate 185Lx60Wx13H(mm)
Holding Force 500kgx2(1200Lbsx2)
Voltage 12 or 24VDC
Current Draw 12V/420mA*2 or 24V/210mA*2
Signal Output Dry Contact, Max Rating of Contact Current 3A
LED Red indicates the door is unlock, Green indicates the door is lock
Suitable for Wooden door, Glass door, Metal door, Fireproof door etc
Surface Temp ≤+20℃
Operating Temp -10～+55℃ (14-131F)
Suitable Humidity 0~95% (non-condensing)
Finishes for Shell Anodized aluminum
Finishes for Magnetic Zinc
Finishes for Armature Zinc
Packing Quantity(PCS/CTN) 2
Packing Size(L*W*H)(cm) 58*18.8*9.2
Gross Weight(KG) 17.36
Do not tighten the armature on the door leaf. Insert a rubber washer between the armature and the door leaf to allow for the face-to-face contact between the armature and the electromagnet. Thus the electromagnetic lock will work effectively.
The maglocks are suitable for out-swing door and inswing door applications. For inswing door applications, the locks should be fitted with “LZ “or “Z” brackets.
The electromagnetic lock requires a face to face fitting as shown in the illustration. Otherwise, the holding force will decrease (direction of hydraulic press pull must be collinear).
Install the electromagnetic lock and armature plate in the special test clamp which is designed for a collinear pull-off test. (The lock and clamp assembly are shown in the illustration). The armature plate direction of hydraulic press pull must be “collinear”, and armature plate centers on core.