Pot Magnets

We offer an extensive range of Pot Magnets, also called as Cup Magnets (magnetic lenses) , from small Pot Magnets lifting 400g up to large Pot Magnets lifting up to 130kg. They exist in a wide range of diameters and heights. We actually offer far more sizes and pull forces across the range than shown on this site – if you cannot see a Pot Magnet of the right size or performance, please contact us for our complete brochure range.

Pot magnet, Cup magnets, Mounting magnets, Magnetic holder, Magnetic hook, Round base magnet, Rubber coated magnetic systems – super-strong adhesive force

pot-magnets

We offer seven types of Pot Magnet plus a Surface Protecting Slide Resist Clamp Magnet:-
Pot Magnet with External Threaded Stud / Boss Mounting
Pot Magnet with Internal Threaded Mounting (Deep Pot)
Pot Magnet with Countersunk Mounting (Shallow Pot)
Pot Magnet with Through Hole Mounting
Pot Magnet with Internal Threaded Stud / Boss Mounting
Pot Magnet with Threaded Through Hole Mounting
Rubber Coated Magnetic Pots
Round Base Magnet

Pot Magnet / Magnetic lenses are characterized by a specific magnetic circuit arrangement, providing thus maximum magnetic force utilization. Their application range includes metalworking plants and/or mechanical engineering plants, in combination with various preparations, tools and devices. We offer Pot Magnets in a silver (chrome, zinc or nickel) finish, a white paint finish, a red paint finish, black rubber coated finish and ferritic stainless steel finish.

Our Pot Magnet can be used in a variety of applications. For example they can be used in extremely cold applications (in theory towards absolute zero) and in extremely hot conditions (up to +300 degrees C, perhaps up to +350 deg C).

All the Pot Magnet types can be used for ambient temperature indoor applications where moisture content is low or negligible. NdFeB Pot Magnets are best for maximum pull strength with a small size. Ferrite Pot Magnets can be used for corrosion resistance, marine, low cost and higher temperature applications. Alnico Pot Magnets can be used in higher temperature applications and where the pull force needs to change as little as possible with temperature variation. Alnico Pot Magnets can also be used in corrosion resistance applications. SmCo Pot Magnets can be used for extreme temperature applications and marine / corrosion resistance applications.

Holding Systems Grip Fast Magnets

Holding Systems Grip Fast Magnets

Holding Systems Grip Fast Magnets, Magpad, Neodymium gripfast magnets, rubber coated Ferrite pot magnet, magnetic holding system, magnetic mounting system, Rubber Covered Magnetic Mounting Pads Holding Systems Grip Fast Magnets Features: Neodymium Grip Fast Style A Neodymium grip fasts incorporate high strength Neodymium magnets assembled on to a mild steel backing plate with a protective […]

Pot Holding Magnetic System With Steel Cap

Pot Holding Magnetic System With Steel Cap

Pot Holding Magnetic System With Steel Cap, Blind Ended Shallow Pot Magnet, Pot Holding Magnets, Sintered Ferrite Flat Pot Magnet, Round Base Ceramic Cup Magnets, Magnetic Assembly, Tools & Custom Assemblies Pot Holding Systems with Steel Cap – The structure of these pots consists of a magnet encased in a steel cup. This design makes […]

Magnetic Pot Holding System With Female Thread

Magnetic Pot Holding System With Female Thread

Magnetic Pot Holding System With Female Thread, High Temperature Pot Holding Systems, Pot Holding Magnets, Sintered Ferrite Pot Magnet, Cup Magnet, Deep Pot Holding Magnet, Hook Pot Magnet, Mount Magnet TMagnetic Pot Holding System With Female Thread – he pot holding systems that have a female thread are ideal for a range of different holding […]

SmCo Bi-pole Deep Pot Magnet

SmCo Bi-pole Deep Pot Magnet

SmCo Bi-pole Deep Pot Magnet, twin-pole pot magnet, Samarium Cobalt bi-pole deep pot magnets, SmCo Cylindrical Pot brass body with fitting tolerance h6, SmCo Deep Pot Holding Magnets This is a SmCo Bi-pole Deep Pot Magnet (also known as a twin-pole pot magnet) which can be used in high temperature clamping applications. It is called a […]

Deep Pot Holding Systems

Deep Pot Holding Systems

Deep Pot Holding Systems, Deep Pot Holding Magnets, Ainico Smco Neodymium Pot Magnet, Samarium Cobalt deep pot magnet system, Pot magnet assemblies, Magnetic core NdFeB (neodymium) Housing brass, Custom Deep pot holding magnet with thread, Deep pot holding magnets with cylindrical pot in different materials / SmCo and Neodymium pot magnets Deep Pot Holding Systems […]

Shallow Pot Holding Magnets Systems

Shallow Pot Holding Magnets Systems

Shallow Pot Holding Magnets Systems, Magnetic Pot Holding System, Ferrite Shallow Pot with Steel Cap, AlNiCo Pot Magnet, SmCo Cup Magnet, Samarium Deep Pot Holding Magnet, SmCo Shallow Pot Magnet, Holding Magnet Pot Neodymium Shallow Pot Holding Magnets Systems Styles: HSMAG have a variety of different Shallow Pots. All of which have the basic structure […]

High Temperature Pot Holding Systems

High Temperature Pot Holding Systems

High Temperature Pot Holding Systems, Magnetic Pot Holding System, Pot Holding Magnets, AlNiCo Pot Magnet, SmCo Cup Magnet, Samarium Deep Pot Holding Magnet, SmCo Shallow Pot Magnet, AlNiCo Holding Magnet Pot High Temperature Pot Holding Systems Styles: The following pots can work at elevated temperatures whilst the magnet maintains its performance. Style A pots, on […]

Swivel Swing Strong Neodymium Magnet Hooks

Swivel Swing Strong Neodymium Magnet Hooks

Swivel Swing Strong Neodymium Magnet Hooks, NdFeB Rotating Magnetic Hook, strong rare earth ferrite rotating magnetic hook, Rotating decorative magnetic hooks ndfeb magnet hook for sale Swivel Swing Strong Neodymium Magnet Hooks Technical parameter: Part No. HSH1015-1 series Dimension Size and Pull Force: see the form Magnetic Hook & Eyebolt super strong neodymium magnets Strong, […]

NdFeB Rotating Magnetic Hook

NdFeB Rotating Magnetic Hook

NdFeB Rotating Magnetic Hook HSH1015, Rotating Neodymium Pot Magnet With Hook, Magnetic Hooks Rotating Swivel Swing Strong Neodymium Magnet Hooks NdFeB Rotating Magnetic Hook Technical parameter: Part No. HSH1015 series Dimension Size and Pull Force: see the form Features: Contains super powerful Neodymium, Rare Earth magnet Can swivel360 degrees and swings 180 degrees Includes non-scratch […]

Ferrite Rotating Pot Magnet With Hook

Ferrite Rotating Pot Magnet With Hook

Ferrite Rotating Pot Magnet With Hook HSH1016, Ferrite Pot Magnets, magnetic hook with inner thread ferrite magnet magnetic holder, Rotating Hook Ceramic Magnets Ferrite Rotating Pot Magnet With Hook Technical parameter: Part No. HSH1016 Model F90.04 Pot Base Size Φ76×10MM Power Force 39KG Weight 255G Features: A variety of forms Created with Ferrite magnet High […]

Standard Mounting Magnets

Standard Mounting Magnets

Standard Mounting Magnets, External Thread Pot Mounting Magnets, Metric Mounting Magnets, neodymium clamping magnet, Rectangular Mounting Magnets, Neodymium Channel Mounting Magnets, Stainless Mounting Magnets, Rubber Mounting Magnets, metric rubber magnets Standard Mounting Magnets Pot Magnets Introduction: A pot magnet is a permanent magnet encased in a steel shell, which is sometimes called a pot, hence […]

Super Long Rectangular Countersunk Neodymium Magnet

Super Long Rectangular Countersunk Neodymium Magnet

Super Long Rectangular Countersunk Neodymium Magnet, Block Sintered Neodymium Magnets With Countersunk Holes, Neodymium (Rare Earth) Countersunk Magnets, Rectangle Strong Powerful Countersink Magnets China Manufactory Super Long Rectangular Countersunk Neodymium Magnet information: Size :  110mm x10mm x5mm with 2 holes / Customized Shape block, rectangular (countersunk) Raw material : Permanent Neodymium Magnet Grade : N35 N38 […]

Block Neodymium Magnets With Countersunk Holes

Block Neodymium Magnets With Countersunk Holes

Block Neodymium Magnets With Countersunk Holes, Countersunk Rectangular Magnet, Strong Powerful Countersink Magnets, Sintered NdFeB, NIB, Neo holding magnets, Permanent Rectangle Industrial Magnet China Manufactory Block Neodymium Magnets With Countersunk Holes information: Size :  40mm x20mm x5mm with 2 holes / Customized Shape block, rectangular (countersunk) Raw material : Permanent Neodymium Magnet Grade : N35 N38 […]

Countersunk Rectangular Magnet Neodymium

Countersunk Rectangular Magnet Neodymium

Countersunk Rectangular Magnet Neodymium, Strong Powerful Countersink Rectangle Magnets, Neodymium Iron Boron Blocks Thickness Magnetization, Sintered NdFeB, NIB, Neo holding magnets, Permanent Industrial Magnet China Manufactory Countersunk Rectangular Magnet Neodymium information: Size :  60mm x20mm x5mm with 2 holes / Customized Shape block, rectangular (countersunk) Raw material : Permanent Neodymium Magnet Grade : N35 N38 N42 […]

huge-neodymium-block-magnet-with-countersunk-hole-for-wind-turbine

Huge Neodymium Block Countersunk Magnet

Block Countersunk Magnet, Huge Super Strong Neodymium Block Magnet with Countersunk Holes for Wind Turbine, Wind Motors & Generators, Wind Turbine NdFeB Block with Countersunk or Counterbore Holes Block Countersunk Magnet Feature: 1) Material: Sintered NdFeB Magnet/Licensed NdFeB Magnet/Rare earth neodymium magnet; 2) Grade:N42,N45,N48,N50,N52,N35SH,N45H,N38SH,N42H; 3) Shape: huge block magnet with countersunk holes; 4) Coating: heavy duty Ni/Nickel,NiCuNi/Nickel-Cu-Nickel,Black Nickel,Zn/Zinc,Black Epoxy,etc; 5) Application: […]

N52 Super Strong Rare Earth Block Fishing Neodymium Magnet

N52 Super Strong Rare Earth Block Fishing Neodymium Magnet

N52 Super Strong Rare Earth Block Fishing Neodymium Magnet, Powerful Neodymium Retrieval Block Countesunk Magnet, N52 NdFeB Rare Earth Recovery Salvage Magnet, Holding and Retrieving Neodymium Permanent Fishing Magnets N52 Super Strong Rare Earth Block Fishing Neodymium Magnet Specification: Name: Strong Countesunk Magnets Material: Rare earth NdFeB Diameter 100 X 50 X 20mm Thread M8 […]

arc-neodymium-countersunk-magnet-for-permanent-magnet-motors

Arc Neodymium Countersunk Magnet

Arc Neodymium Countersunk Magnet for Permanent Magnet Motors, Super Strong Ndfeb Arc Magnets for Motors & Generators, Segment Countersunk Ndfeb Magnet Arc Neodymium Countersunk Magnet Feature: 1.Grades: N30-N50, 35M-48M, 33H-42H, 35SH-45SH, 30UH-40UH, 30EH-38EH. 2.Size: various customized 3.Coating: Nickel,Zinc,Epoxy,Gold and etc. 4.Shapes: Cylinder and we can also manufacture the shape of magnet according to clients’ requirement 5. Package: carton or according to the […]

block neodymium countersunk magnets with single hole

Block Neodymium Countersunk Magnets with Single Hole

Neodymium Countersunk Magnets, Block Neodymium Magnets with single countersunk hole, Rectangle/Square NdFeB Magnet with 90 °Countersunk, Rare Earth Neodymium Countersink Magnets, Super strong neodymium magnets with counterbore hole, countersunk rectangular magnets Neodymium Countersunk Magnets feature: Material Neodymium-Iron-Boron Working Temperature Grade Max. Operating Temperature N35-N52 80°C (176°F) N33M- N48M 100°C (212°F) N33H-N48H 120°C (248°F) N30SH-N45SH 150°C (302°F) N30UH-N40UH 180°C (356°F) N28EH-N38EH 200°C (392°F) N28AH-N35AH 220°C (428°F) […]

knob ferrite magnet with rubber cover

Knob Ferrite Posting Magnets

Posting Magnets, Knob Ferrite Magnet with Rubber Cover, Ceramic Round Base Magnet with Knob and Rubber Cover, Handle Magnets, Magnetic Holder with Knob Posting Magnets – Knob Ferrite Magnet – Magnetic pot with rubber cover are usually used on metal sheets with sensitive surface (e. G. Varnished, chromed, nickel plated and so on). The rubber protects the surfaces from scratching (in case […]

NdFeB Countersunk Magnets

NdFeB Countersunk Magnets

NdFeB Countersunk Magnets, Customized Ring Block Disc Shaped Countersunk Neodymium Iron Boron, Sintering Countersunk Permanent Magnet, Rare Earth NdFeB Countersink Magnets China Manufacturer Product name NdFeB Countersunk Magnets Permanent magnet Material Neodymium iron boron Grade & working Temperature Grade Max. Operating Temperatures N35-N45 80°C (176°F) N48-N52 60°C (160°F) 35M- 50M 100°C (212°F) 33H-48H 120°C (248°F) 33SH-45SH 150°C (302°F) […]