Injection Molded Magnets

Injection Molded Magnets, Injection Molded Ferrite magnets, Injection Molded NdFeB magnets, Injection Molding Permanent Magnets China Supplier

Introduction

Injection molded magnets are available using ferrite, neodymium-iron-boron, SmCo and SmFeN, offering thus a wide range of magnetic properties. Binder types include Nylon 6, Nylon 12 and PPS. The different combinations of binders and magnetic alloys offer a wide range of application temperatures from -40°C up to 160°C.

The Injection molding process is particularly well suited to molding complex shapes and thin walled parts. This opens entirely new possibilities in design of magnets and magnetic systems, making thin rings, mechanical non-magnetized details etc. possible. More over, the magnet can be molded over a metallic or polymer component (insert molding) or molded over with a normal plastic, thus manufacturing an entire assembly in one or two process steps.

Injection Molded Ferrite/NDFEB magnets offer design engineers near limitless shape and magnetization possibilities. Its high tensile strength allows injection-molded components to withstand high rotational forces, and it offers both excellent chemical and impact resistance.

Isotropic grades can be magnetized in any direction (axial, radial or multipolar). Anisotropic grades are magnetically oriented in a preferred direction during the molding process and offer higher energy products.

Our experts have had great success with new hybrids of Neodymium Iron Boron and Ferrite magnets, offering our customers an even broader range of choices. We offer complete engineering assistance, prototyping services, fabrication and inventory stocking.

Injection Molded Magnets

Injection Molded Magnets

Manufacturing process

Permanent magnet powder and polymer are first kneaded together to form a compound, which then can be used for injection molding. Injection molding of permanent magnets is basically identical with injection molding of normal plastics. The only difference is that for production of anisotropic magnets a magnetic field is needed in the molding tool. After molding the magnets normally do not need any further operations, except magnetising, before use. In certain cases magnets can be magnetized in the molding tool and separate magnetizing is thus not needed.

Depending on the orientation of the magnet, there are differences in the molding process:

1. Isotropic magnets (no magnetic field in the tool): NdFeB, ferrite

2. Anisotropic (axial, diametral, radial) by electromagnet(s) in the tool: Ferrite, NdFeB, SmCo, SmFeN

3. Polar anisotropy, generated by permanent magnets in the tool: Ferrite

Materials

SmFeN Rare Earth (plastic bonded)
SmCo Rare Earth (plastic bonded)
Hard Ferrite (plastic bonded)
NdFeB Rare Earth (plastic bonded)

Magnetic properties

Properties of the injection molded magnets depend on the magnetic material and binder used. Properties given in the table 1 and 2 are typical for each grade at the room temperature. The actual properties in a finished magnet may differ from the material properties due to magnet geometry, magnetizing etc. Usually the qeometry of an injection molded magnet do not allow control of the properties by standard methods, like BH-curve tracker. Therefore, it’s important to agree on QA methods.

More information, including demagnetisation curves in various temperatures and physical properties, for each grade can be found in the datasheets (possibility to download). The same information is available in numerical form for magnetic modelling (request for info – e-mail).

Typical magnetic properties of bonded Ferrite magnets grades

Typical magnetic properties of bonded Ferrite magnets

Typical magnetic properties of bonded NdFeB magnet grades

Typical magnetic properties of bonded NdFeB injection molded magnets

Fig 1 Typical demagnetisation curves for injection molded ferrite magnets grade xxx at various temperatures

Typical demagnetisation curves for injection molded Ferrite magnet grade

Fig 2 Typical demagnetisation curves for injection molded NdFeB grade xxx at various temperatures

Typical demagnetisation curves for injection molded NdFeB grade

Radial Multipolar Ferrite Rotor Magnet Ring For Radiator Motor

Radial Multipolar Ferrite Rotor Magnet Ring For Radiator Motor

Radial Multipolar Ferrite Rotor Magnet Ring For Radiator Motor, Radial Ring Injected Bonded Ferrite Ring Magnet, Overmolded Plastic Bonded injection molded encoder sensor magnets, Permanent Motor Rotor Multipole Magnetic Assemblies, Bonded ceramic magnet Isotropic and Anisotropic Permanent Plastic ferrite bonded magnet, Magnetic Assembly China Supplier Radial Multipolar Ferrite Rotor Magnet Ring For Radiator Motor No. […]

Injection Ferrite Rotor Magnet DC Motor High Temperature Magnet Ring

Injection Ferrite Rotor Magnet DC Motor High Temperature Magnet Ring

Injection Ferrite Rotor Magnet DC Motor High Temperature Magnet Ring For Radiator Motor, Radial Ring Injected Bonded Ferrite Ring Magnet, Overmolded Plastic Bonded injection molded encoder sensor magnets, Permanent Motor Rotor Multipole Magnetic Assemblies, Bonded ceramic magnet Isotropic and Anisotropic Permanent Plastic ferrite bonded magnet, Magnetic Assembly China Supplier Injection Ferrite Rotor Magnet DC Motor […]

4-poles Shaft Plastic Overmolded Ferrite Rotor Magnets For Radiator Motor

4-poles Shaft Plastic Overmolded Ferrite Rotor Magnets For Radiator Motor

4-poles Shaft Plastic Overmolded Ferrite Rotor Magnets For Radiator Motor, Radial Ring Injected Bonded Ferrite Ring Magnet, Overmolded Plastic Bonded injection molded encoder sensor magnets, Permanent Motor Rotor Multipole Magnetic Assemblies, Bonded ceramic magnet Isotropic and Anisotropic Permanent Plastic ferrite bonded magnet, Magnetic Assembly China Supplier 4-poles Shaft Plastic Overmolded Ferrite Rotor Magnets For Radiator […]

Radiator Motor Injection Ferrite Rotor Magnet

Radiator Motor Injection Ferrite Rotor Magnet

Radiator Motor Injection Ferrite Rotor Magnet, Radial Ring Injected Bonded Ferrite Ring Magnet, Overmolded Plastic Bonded injection molded encoder sensor magnets, Permanent Motor Rotor Multipole Magnetic Assemblies, Bonded ceramic magnet Isotropic and Anisotropic Permanent Plastic ferrite bonded magnet, Magnetic Assembly China Supplier Radiator Motor Injection Ferrite Rotor Magnet No. HSIMM-87 Material: plastic bonded Ferrite Number […]

Injection Molding Rotor Ring Plastic Ferrite Magnets

Injection Molding Rotor Ring Plastic Ferrite Magnets

Injection Molding Rotor Ring Plastic Ferrite Magnets, Radial Ring Injected Bonded Ferrite Ring Sensor Magnet, Overmolded Plastic Bonded injection molded encoder magnets, Permanent Motor Rotor Multipole Magnetic Assemblies, Bonded ceramic magnet Isotropic and Anisotropic Permanent Plastic ferrite bonded magnet, Magnetic Assembly China Supplier Injection Molding Rotor Ring Plastic Ferrite Magnets No. HSIMM-86 Material: plastic bonded […]

Motor Rotor Radial Ring Ferrite Magnet

Motor Rotor Radial Ring Ferrite Magnet

Motor Rotor Radial Ring Ferrite Magnet, Injected Bonded Ferrite Ring Sensor Magnet, Overmolded Plastic Bonded injection molded encoder magnets, Permanent Motor Rotor Multipole Magnetic Assemblies, Bonded ceramic magnet Isotropic and Anisotropic Permanent Plastic ferrite bonded magnet, Magnetic Assembly China Supplier Motor Rotor Radial Ring Ferrite Magnet No. HSIMM-85 Material: plastic bonded Ferrite Number of magnetizing […]

Injection Moulded Ferrite Planar 8-Pole Rotor Ring Magnet

Injection Moulded Ferrite Planar 8-Pole Rotor Ring Magnet

Injection Moulded Ferrite Planar 8-Pole Rotor Ring Magnet, Injected Bonded Ferrite Ring Sensor Magnet, Overmolded Plastic Bonded injection molded encoder magnets, Permanent Motor Rotor Multipole Magnetic Assemblies, Bonded ceramic magnet Isotropic and Anisotropic Permanent Plastic ferrite bonded magnet, Magnetic Assembly China Supplier Injection Moulded Ferrite Planar 8-Pole Rotor Ring Magnet No. HSIMM-84 Material: plastic bonded […]

Internal Magnetization Multipole Plastic Outer Rotor Magnetic Ring

Internal Magnetization Multipole Plastic Outer Rotor Magnetic Ring

Internal Magnetization Multipole Plastic Outer Rotor Magnetic Ring, Injected Bonded Ferrite Ring Sensor Magnet, Overmolded Plastic Bonded injection molded encoder magnets, Permanent Motor Rotor Multipole Magnetic Assemblies, Bonded ceramic magnet Isotropic and Anisotropic Permanent Plastic ferrite bonded magnet, Magnetic Assembly China Supplier Internal Magnetization Multipole Plastic Outer Rotor Magnetic Ring  No. HSIMM-83 Material: plastic bonded […]

Plastic Ferrite Ring Magnets for Intelligent Gas Meter

Plastic Ferrite Ring Magnets for Intelligent Gas Meter

Plastic Ferrite Ring Magnets for Intelligent Gas Meter, Injected Bonded Ferrite Ring Sensor Magnet, Overmolded Plastic Bonded injection molded encoder magnets, Permanent Motor Rotor Multipole Magnetic Assemblies, Bonded ceramic magnet Isotropic and Anisotropic Permanent Plastic ferrite bonded magnet, Magnetic Assembly China Supplier Plastic Ferrite Ring Magnets for Intelligent Gas Meter No. HSIMM-82 Material: plastic bonded […]

16 Pole Injection Molded Bonded Magnet Ferrite Ring

16 Pole Injection Molded Bonded Magnet Ferrite Ring

16 Pole Injection Molded Bonded Magnet Ferrite Ring, Injected Bonded Ferrite Ring Sensor Magnet, Overmolded Plastic Bonded injection molded encoder magnets, Permanent Motor Rotor Multipole Magnetic Assemblies, Bonded ceramic magnet Isotropic and Anisotropic Permanent Plastic ferrite bonded magnet, Magnetic Assembly China Supplier 16 Pole Injection Molded Bonded Magnet Ferrite Ring No. HSIMM-81 Material: plastic bonded […]

64 Poles Injection Molded Encoder Multipolar Magnetic Ring

64 Poles Injection Molded Encoder Multipolar Magnetic Ring

64 Poles Injection Molded Encoder Multipolar Magnetic Ring, Injected Bonded Ferrite Ring Sensor Magnet, Overmolded Plastic Bonded injection molded encoder magnets, Permanent Motor Rotor Multipole Magnetic Assemblies, Bonded ceramic magnet Isotropic and Anisotropic Permanent Plastic ferrite bonded magnet, Magnetic Assembly China Supplier 64 Poles Injection Molded Encoder Multipolar Magnetic Ring No. HSIMM-80 Material: plastic bonded […]

Anisotropic Injection Molded Ferrite Ring with Copper Sleeve

Anisotropic Injection Molded Ferrite Ring with Copper Sleeve

Anisotropic Injection Molded Ferrite Ring with Copper Sleeve, Injected Bonded Ferrite Ring Sensor Magnet, Overmolded Plastic Bonded injection molded sensor hall induction magnets, Permanent Motor Rotor Multipole Magnetic Assemblies, Bonded ceramic magnet Isotropic and Anisotropic Permanent Plastic ferrite bonded magnet, Magnetic Assembly China Supplier Anisotropic Injection Molded Ferrite Ring with Copper Sleeve No. HSIMM-79 Material: […]

Multipole Sensing Hall Magnetic Ring Injection Ferrite

Multipole Sensing Hall Magnetic Ring Injection Ferrite

Multipole Sensing Hall Magnetic Ring Injection Ferrite, Injected Bonded Ferrite Ring Sensor Magnet, Overmolded Plastic Bonded injection molded sensor hall induction magnets, Permanent Motor Rotor Multipole Magnetic Assemblies, Bonded ceramic magnet Isotropic and Anisotropic Permanent Plastic ferrite bonded magnet, Magnetic Assembly China Supplier Multipole Sensing Hall Magnetic Ring Injection Ferrite No. HSIMM-78 Material: plastic bonded […]

Axial Plastic Multipole Magnetic Ring for Household Appliances

Axial Plastic Multipole Magnetic Ring for Household Appliances

Axial Plastic Multipole Magnetic Ring for Household Appliances, Injected Bonded Ferrite Ring Magnet, Overmolded Plastic Bonded injection molded Ferrite motor magnets, Permanent Motor Rotor Multipole Magnetic Assemblies, Bonded ceramic magnet Isotropic and Anisotropic Permanent Plastic ferrite bonded magnet, Magnetic Assembly China Supplier Axial Plastic Multipole Magnetic Ring for Household Appliances No. HSIMM-77 Material: plastic bonded […]

Small 9.5mm Dia Injection Molded Plastic Ferrite Ring

Small 9.5mm Dia Injection Molded Plastic Ferrite Ring

Small 9.5mm Dia Injection Molded Plastic Ferrite Ring for Micro-Motors, Injected Bonded Ferrite Ring Magnet, Overmolded Plastic Bonded Ferrite motor arc magnets, Permanent Motor Rotor Multipole Magnetic Assemblies, Bonded ceramic magnet Isotropic and Anisotropic Permanent Plastic ferrite bonded magnet, Magnetic Assembly China Supplier Small 9.5mm Dia Injection Molded Plastic Ferrite Ring No. HSIMM-76 Material: plastic […]

Injection Moulded Ferrite Multipole Rings for Micro-Motors

Injection Moulded Ferrite Multipole Rings for Micro-Motors

Injection Moulded Ferrite Multipole Rings for Micro-Motors, Injected Bonded Ferrite Ring Magnet, Overmolded Plastic Bonded Ferrite motor arc magnets, Permanent Motor Rotor Multipole Magnetic Assemblies, Bonded ceramic magnet Isotropic and Anisotropic Permanent Plastic ferrite bonded magnet, Magnetic Assembly China Supplier Injection Moulded Ferrite Multipole Rings for Micro-Motors No. HSIMM-75 Material: plastic bonded Ferrite Number of […]

Automobile Turbine Rotor Magnet Bonded Injection Ceramic

Automobile Turbine Rotor Magnet Bonded Injection Ceramic

Automobile Turbine Rotor Magnet Bonded Injection Ceramic, Injected Bonded Ferrite Ring Radial Magnet, Overmolded Plastic Bonded Ferrite motor arc magnets, Permanent Motor Rotor Multipole Magnetic Assemblies, Bonded ceramic magnet Isotropic and Anisotropic Permanent Plastic ferrite bonded magnet, Magnetic Assembly China Supplier Automobile Turbine Rotor Magnet Bonded Injection Ceramic No. HSIMM-74 Material: plastic bonded Ferrite Number […]

Bonded Injection Molding Arc Magnet for Sphygmomanometer

Bonded Injection Molding Arc Magnet for Sphygmomanometer

Bonded Injection Molding Arc Magnet for Sphygmomanometer, Injected Bonded Ferrite Segment Magnet, Overmolded Plastic Bonded Ferrite motor arc magnets, Permanent Motor Rotor Multipole Magnetic Assemblies, Bonded ceramic magnet Isotropic and Anisotropic Permanent Plastic ferrite bonded magnet, Magnetic Assembly China Supplier Bonded Injection Molding Arc Magnet for Sphygmomanometer No. HSIMM-73 Material: plastic bonded Ferrite Number of […]

Plastic Inductor Injection DC Motor Radial Ring Magnet

Plastic Inductor Injection DC Motor Radial Ring Magnet

Plastic Inductor Injection DC Motor Radial Ring Magnet, Injected Bonded Ferrite Radial Multipole Magnet, Overmolded Plastic Bonded Ferrite radial multi-pole magnetization sensor magnets, Permanent Motor Rotor Multipole Magnetic Assemblies, Bonded ceramic magnet Isotropic and Anisotropic Permanent Plastic ferrite bonded magnet, Magnetic Assembly China Supplier Plastic Inductor Injection DC Motor Radial Ring Magnet No. HSIMM-72 Material: […]

Injected Bonded Ferrite Radial Multipole Magnet

Injected Bonded Ferrite Radial Multipole Magnet

Injected Bonded Ferrite Radial Multipole Magnet, Refrigerator defrost motor rotor magnet, Overmolded Plastic Bonded Ferrite radial multi-pole magnetization sensor magnets, Permanent Motor Rotor Multipole Injection Molded Neodymium Ferrite Magnetic Assemblies, Bonded ceramic magnet Isotropic and Anisotropic Permanent Plastic ferrite bonded magnet, Magnetic Assembly China Supplier Injected Bonded Ferrite Radial Multipole Magnet No. HSIMM-71 Material: plastic […]