Bonded Magnets

Bonded_page_header

Bonded Magnets, (Polymer bonded magnets, Compression Bonded Neodymium Magnets, Injection Molded Ndfeb or Ferrite Magnets

Bonded Magnet (Polymer bonded magnets) is one of the most important magnetic materials. It opened a new world of application possibilities. Thermo-elastomer and thermo-plastic resins can be blended together with a variety of magnetic powders to form injection molded, compression and flexible magnets.

Bonded NdFeB magnet is composed with compression NdFeB magnet, injection NdFeB magnet and flexible NdFeB magnet. Since its birth in the middle of 1980’s, the demand of bonded NdFeB magnet has been dramatically increasing for the industries of automatic control, automobile, 3C products (computer, communication & consumer electronics) and household electric appliance with virtues as follows:

  • Offering new and cost-effective solutions for design and manufacture with availabilities of typical toughness of plastic, diverse and complex geometry, preferred magnetizing pattern, as well as more assembling methods.
  • Extensive choice of property range 1.0—11.5 MGOe.
  • Much better resistance of corrosion than sintered NdFeB magnet.
  • Free-machining by direct molding with net shape and close-tolerance
  • Minimizing figure and weight of application due to its comparatively stronger magnetic property and lower density.

Bonded magnet materials can be made from Ceramic, NdFeB, or SmCo powders which are combined with a variety of plastic binders (Matrix). They can be either Injection Molded or Compression Bonded into complex magnet shapes with finished dimensions. Bonded magnet materials have a moderate resistance to corrosion and a low tolerance to heat because of the binder material. Bonded magnet materials are commonly used in automotive parts because they lend themselves to large production quantities and complex shape can be produced at a low cost.

Injection molded magnets can be formed into complex shapes and be insert molded directly onto other components to produce assembly parts. Compression bonded magnets offer higher magnetic output than injection-molded magnets, but are limited to more simple geometries.

Forming methods of Bonded Magnets

Bonded Magnets are formed by either injection molding or compression molding.

Injection molding provides flexible shapes and compression molding provides higher magnetic properties.

Forming-methods-of-bonded-magnets

Injection Molded:

  • Binder Types / Nylon / PPS / Polyamide.
  • Temperature Range -40c – 180c
  • Very Tight tolerances off tool ( 0.002 -0.003 Typical )
  • Very good mechanical strength

Compression Bonded:

  • Higher Magnetic Strength due to higher magnetic particle density.
  • Epoxy Binder / Resistant to normal industrial solvents and automotive fluids
  • Epoxy Coat after manufacturing to prevent oxidation
  • Temperature Range -40c – 165c
  • “Tight” tolerances off tool
  • Good mechanical strength

Typical Bonded Magnet Applications:

  • Sensors
  • Brushless DC Motors

General Bonded Magnet Applications:

  • Materials are isotropic and can be magnetized in any direction
  • Wide range of existing tool sizes are available in rings, discs and rectangles
  • Exsisting Multipole magnetizing fixtures for quick prototyping
  • Easily machined
  • Existing Multipole rings simplify assembly verse arc sepments

Surface Treatment:

In blending process, NdFeB alloy powder is embedded in epoxy resin or other thermal plastics what are solvent resistant against normal industrial and automotive fluids. Therefore bonded NdFeB magnet is more stable than sintered NdFeB magnet. However if the magnet is working in hot, moist and other corrosive environment, then coating is very necessary. Normally compression NdFeB magnet should have surface treated for protection purpose, meanwhile injection and calender bonded NdFeB magnet are no need to be coated due to high volume fraction of binder.

Temperature Character:

Both magnet remanence and coercive force will be decreased when the temperature on bonded NdFeB magnet is increased. Irreversible and reversible flux loss will take place at the same time. Temperature change will also obviously take effect on swelling, shrinkage, hardness, strength etc physical characters of bonded NdFeB magnet. As a composite, the maximum working temperature of bonded NdFeB magnet is not merely determined by the type of NdFeB alloy powder but also influenced by the used binder. The recommended working temperature of nylon 12 (PA12), nylon 6 (PA6), epoxy resin and PPS are respectively up to 100℃, 120℃, 180℃, 200℃ for continuously working.

Injected Pressed Plastic Ferrite Magnet

Injected / Pressed Plastic Ferrite Magnet

Injected / Pressed Plastic Ferrite Magnet, Overmolded Plastic Bonded NdFeB Ferrite radial multi-pole magnetization sensor magnets, Permanent Motor Rotor Multipole Injection Molded Neodymium Ferrite Magnetic Assemblies, Bonded ceramic magnet Isotropic and Anisotropic Permanent Plastic ferrite bonded magnet, Magnetic Assembly China Supplier Injected / Pressed Plastic Ferrite Magnet No. HSIMM-70 Material: plastic bonded Ferrite Number of […]

Injected Pressed Plastic Bonded Permanent Magnets

Injected / Pressed Plastic Bonded Permanent Magnets

Injected / Pressed Plastic Bonded Permanent Magnets, Overmolded Plastic Bonded NdFeB Ferrite radial multi-pole magnetization sensor magnets, Permanent Motor Rotor Multipole Injection Molded Neodymium Ferrite Magnetic Assemblies, Bonded ceramic magnet Isotropic and Anisotropic Permanent Plastic ferrite bonded magnet, Magnetic Assembly China Supplier Injected / Pressed Plastic Bonded Permanent Magnets Magnet No. HSIMM-69 Material: plastic bonded […]

Injection Molded NdFeB Permanent Magnet for Automobile Door Lock

Injection Molded NdFeB Permanent Magnet for Automobile Door Lock

Injection Molded NdFeB Permanent Magnet for Automobile Door Lock, Bonded Multipole Ring Compression Molded NdFeB Magnets, Industrial Custom Ring Bonded Compression Molded NdFeB Magnets, Compression Bonded NdFeB Magnets for Rotors, Permanent Ndfeb Plastic bonded magnet, ring injection bonded magnet, Magnetic Assemblies China factory Injection Molded NdFeB Permanent Magnet for Automobile Door Lock – Name: Customized […]

Hot-Pressed Bonded NdFeB Ring Magnets for Motors

Hot-Pressed Bonded NdFeB Ring Magnets for Motors

Hot-Pressed Bonded NdFeB Ring Magnets for Motors, Bonded Multipole Ring Compression Molded NdFeB Magnets, Industrial Custom Ring Bonded Compression Molded NdFeB Magnets, Compression Bonded NdFeB Magnets for Rotors, Permanent Ndfeb Plastic bonded magnet, ring injection bonded magnet, Magnetic Assemblies China factory Hot-Pressed Bonded NdFeB Ring Magnets for Motors – Name: Customized industrial bonded NdFeB ring […]

Bonded Multipole Ring Compression Molded NdFeB Magnets

Bonded Multipole Ring Compression Molded NdFeB Magnets

Bonded Multipole Ring Compression Molded NdFeB Magnets, Industrial Custom Ring Bonded Compression Molded NdFeB Magnets, Compression Bonded NdFeB Magnets for Air Conditioner, Permanent Ndfeb Plastic bonded magnet, ring injection bonded magnet, Magnetic Assemblies China factory Bonded Multipole Ring Compression Molded NdFeB Magnets – Name: Customized industrial bonded NdFeB ring neodymium magnets Material: Fast-quenched NdFeB magnetic […]

industrial bonded NdFeB ring neodymium magnets

Industrial Bonded NdFeB Ring Neodymium Magnets

Industrial Bonded NdFeB Ring Neodymium Magnets, Custom Ring Bonded Compression Molded NdFeB Magnets, Compression Bonded NdFeB Magnets for Air Conditioner, Permanent Ndfeb Plastic bonded magnet, ring injection bonded magnet, Magnetic Assemblies China factory Custom Industrial Bonded NdFeB Ring Neodymium Magnets – Name: Customized industrial bonded NdFeB ring neodymium magnets Material: Fast-quenched NdFeB magnetic powder and […]

Custom Ring Bonded Compression Molded NdFeB Magnets

Custom Ring Bonded Compression Molded NdFeB Magnets

Custom Ring Bonded Compression Molded NdFeB Magnets, Compression Bonded NdFeB Magnets for Air Conditioner, Ring Injection Molded Bonded Neodymium Permanent Magnets, Permanent Ndfeb Plastic bonded magnet, ring injection bonded magnet, Magnetic Assemblies China factory Custom Ring Bonded Compression Molded NdFeB Magnets – Name: Compression bonded ndfeb magnet Material: Fast-quenched NdFeB magnetic powder and binder Grade: […]

Custom Compression Bonded NdFeB Ring Magnets

Custom Compression Bonded NdFeB Ring Magnets

Custom Compression Bonded NdFeB Ring Magnets, Bonded NdFeB Magnets for Air Conditioner, Ring Injection Molded Bonded Neodymium Permanent Magnets, Permanent Ndfeb Plastic bonded magnet, ring injection bonded magnet, Magnetic Assemblies China factory Custom Compression Bonded NdFeB Ring Magnets – Name: Compression bonded ndfeb magnet Material: Fast-quenched NdFeB magnetic powder and binder Grade: As customer request […]

Customized Injection Bonded NdFeB Ring Magnets

Customized Injection Bonded NdFeB Ring Magnets

Customized Injection Bonded NdFeB Ring Magnets, Bonded NdFeB Magnets for Air Conditioner, Ring Injection Molded Bonded Neodymium Permanent Magnets, Permanent Ndfeb Plastic bonded magnet, ring injection bonded magnet, Magnetic Assemblies China factory Customized Injection Bonded NdFeB Ring Magnets – Injection molded magnets are available using ferrite, neodymium-iron-boron, or blends of magnetic materials to achieve an […]

Radial Multi-poles Bonded Ring Magnets

Radial Multi-poles Bonded Ring Magnets

Radial Multi-poles Bonded Ring Magnets, Radially Multi-poles Bonded NdFeB Ring Magnets for Motors, Multipole Magnetized Ferrite Ring Magnet, Radially multipole magnetized ceramic ring magnets Bonded Ring Magnets Part No. HSFMPRM-02 – In terms of magnetic property, Bonded NdFeB magnet is much better than the dry-pressed anisotropic ceramic magnet and injection ferrite magnets. While desgining the motors, […]

Plastic Bonded NdFeB Magnets

Permanent Plastic Bonded NdFeB Magnets

Permanent Plastic Bonded NdFeB Magnets, Bonded Neodymium magnets, Bonded NdFeB Polymer Magnets, Isotropic / anisotropic permanent plastic magnet China Supplier Permanent Plastic Bonded NdFeB Magnets Feature: Part No.: BNMPC-01 Type: Permanent Composite: Neodymium Magnet Size: Custom Application: Motors, Devices, Printers, Sensors, CD/DVD ROM and so on. Packing: cartons / pallets Delivery Date: 10-18 days Place of Origin: Zhejiang, […]

Multi-pole Plastic Injection Ring Magnets

Multi-pole Ferrite Plastic Injection Ring Magnets

Multi-pole Plastic Injection Ring Magnets, Radial Multi-poles Bonded Ferrite Ring Magnets, China Bonded Plastic Ferrite Magnet, Anisotropic Ferrite Multipoles Magnetic Rings Supplier Part No. HSFMPRM-03 Multi-pole Plastic Injection Ring Magnets are made of bonded ferrite magnet powder, Plastics(pvc,nylon,pp,ect) and other materials, can be made into dry press anisotropic ferrite magnet. In terms of magnetic property, […]

Neobond Multipole Radial Ring

Neobond Multipole Radial Ring Permanent Magnets

Neobond Multipole Radial Ring, Radial Multipole Magnetic Rings Assembly, Multi-pole Magnetized Bonded Neodymium Ring, Neobond Radial Multipole Magnetic Rings, Sensor Multipolar Magnet China supplier G32A Radial Multipole Ring – 2″ – Neobond Multipole Radial Ring Part No. HSRMR-G32A Four grades of magnetic materials Cost effective design High resistance to demagnetization Operation from -40°C to 125°C […]

64 Poles Radial Multipole Ring

64 Poles Radial Multipole Ring Neobond Magnet

64 Poles Radial Multipole Ring, Radial Multipole Magnetic Rings Assembly, Multi-pole Magnetized Target Wheel, Bonded Neodymium Radial Multipolar Ring, Neobond Radial Multipole Magnetic Rings, Sensor Magnet China supplier G22 Radial Multipole Ring – 1 3/8″ – Radial Multipole Magnetic Rings Assembly Part No. HSRMR-G22 Four grades of magnetic materials Cost effective design High resistance to demagnetization […]

PM Motor Laminated Rare Earth Magnets

PM Motor Laminated Rare Earth Magnets

PM Motor Laminated Rare Earth Magnets, customized permanent magnetic lamination transformer core for motors, Reducing Eddy Current Loss Neodymium Lamination Magnets, High working temperature segmention neodymium Laminated Magnets, Laminated rare earth permanent magnets for eddy current in motor PM Motor Laminated Rare Earth Magnets Part No. HSLAMIM-07 Customzied Specific Requirements Know as Lamination Magnetic Core […]

Laminated Magnetic Core Reducing Eddy Current Loss

Laminated Magnetic Core Reducing Eddy Current Loss

Laminated Magnetic Core Reducing Eddy Current Loss, Neodymium Lamination Magnets, High working temperature 200℃ segmention neodymium Laminated Magnets, Permanent type Phosphated Laminated Magnets for High Efficiency Motors, Laminated rare earth permanent magnets for eddy current in motor Laminated Magnetic Core Reducing Eddy Current Loss Part No. HSLAMIM-06 Customzied Specific Requirements Know as Lamination Magnetic Core […]

Multi Poles Bonded Neo Ring Radial Diametrically Magnet

Multi Poles Bonded Neo Ring Radial Diametrically Magnet

Multi Poles Bonded Neo Ring Radial Diametrically Magnet, Diametrically Magnetized Multi Skew Poles Radially Ring Neodymium Magnets, Bonded Ndfeb Multi Poles Radial Ring Magnet, 45 degree Skew Magnetized 8 Poles Multipolar NdFeB Ring Magnets Multi Poles Bonded Neo Ring Radial Diametrically Magnet Item Specifics: Grade: NB10 (Br: 680-730mT, Hcj: 640-800KA/m, BH Max: 76-84 KJ/m, HCB: […]

Ring Injection Molded Bonded NdFeB Magnets

Ring Injection Molded Bonded NdFeB Magnets

Ring Injection Molded Bonded NdFeB Magnets, Bonded NdFeB Magnets for Air Conditioner, Ring Injection Molded Bonded Neodymium Permanent Magnets, Permanent Ndfeb Plastic bonded magnet, ring injection bonded magnet, Magnetic Assemblies Ring Injection Molded Bonded NdFeB Magnets – Injection molded magnets are available using ferrite, neodymium-iron-boron, or blends of magnetic materials to achieve an extensive range […]

Permanent Injection Molded Magnets for Brushless DC Motor

Permanent Injection Molded Magnets for Brushless DC Motor

Permanent Injection Molded Magnets for Brushless DC Motor, Neodymium Injected Bonded NdFeB Magnet for Brushless DC Motors, Injection Molded Bonded NdFeB, Binder Types / Nylon / PPS / Polyamide Injected Moulding Magnets Permanent Injection Molded Magnets for Brushless DC Motor – Bonded magnet is one of the most important magnetic materials. It opened a new […]

Permanent Bonded Compression Moulding NdFeB Magnet for Air Conditioner

Permanent Bonded Compression Moulding NdFeB Magnet for Air Conditioner

Permanent Bonded Compression Moulding NdFeB Magnet for Air Conditioner, Bonded Injection Moulding Ferrite Magnet for Sensor, Permanent Ndfeb Plastic bonded sensor magnet, Ferrite injection bonded ring magnet China supplier Permanent Bonded Compression Moulding NdFeB Magnet for Air Conditioner – Bonded magnet materials can be created through Injection Molded and can be made from NdFeB, Strontium […]