Shuttering Magnets with Adapters, MAGNET BOX WITH ADAPTER, MAGNETIC SHUTTERING SYSTEMS, Shuttering Box Magnet with Adaptor Accessories

Shuttering Magnet with Adapter (MULTI-PURPOSE ADAPTERS) used to fasten the shuttering box magnet with precast side mold tightly for shearing resistance after concrete pouring and vibrating on the steel table. It’s easy to assembly the adapter into the box magnets with two sided thread as M12, M16, M18 optional.

Shuttering Magnets with Adapting accessories are supportive to connect the magnetic system and formwork side mould tightly. The above adapter is designed for fixing precast plywood or wooden material form rails in the thick precast solid walls production. Generally the magnets used to stand up to the side of wooden forms directly to support. But when producing thick solid walls or sandwich slabs, it requires extra supports on the top to fix the side mold. The normal single standard box magnet is hardly to work ideally. Under the circumstance, the adaptor accessory is necessary to use for the top supports.

Shuttering System Shuttering Magnets with Adapters

Shuttering System Shuttering Magnets with Adapters

The machined thread at the buttom of rod could be easily threaded into the welded nuts of the box magnet housing. And locate the standard switchable push/pull button magnets with adaptor to the right position, push the button of magnet to active the magnetic force. Subsequently adjust the above bar to the required height against the tope of wooden side forms. Each step of installation could be easily operated by manual.

In the processing of precast concrete panels production, shuttering box magnets are widely applied for positioning and fixing side form mold on the steel casting beds, especially for tilting-up table. It features small size for limited table space occupation in power strong holding power, due to the integrated permanent neodymium magnets. In order to make the most advantage of shuttering box magnet’s holding force, it’s essential to maintain the synchronization between magnets and precast side mold. Magnet adapter as whole as a magnetic fixture are found to accomplish this work, which will enlarge the shearing force extremely from moving and sliding. In front of installing shuttering box magnets, put the adapter on it and let it connected with mould side rail, through welding or nailing into the steel or wooden form-work.

As a leading shuttering box magnets manufacturer, HSMAG are serving and participating in hundreds of precasting projects by outputting our professional knowledge and qualified products on magnetic system concerning on precast filed. Here you can find all your magnetic adapters, suitable for your production site.