NdFeB Magnet Mechanical Processing Introduction of NdFeB magnet slicing, wire cutting, surface grinding, chamfering, etc. The slicing, wire cutting, surface grinding, forming grinding, ultrasonic drilling, chamfering, etc. of NdFeB magnets are all mechanical processing. Today, let's make a popular science on these operating procedures to satisfy your curiosity. Slice The large blank is processed into [...]
HSMAG Magnets Manufacturing & Quality OEM Service Neodymium magnets are custom-made. We devote ourselves to the research and development of sintered NdFeB magnet since the company’s establishment. With the abundant experiences and stable technical craft, we can produce highly precise and intricately shaped sintered NdFeB magnet with different shape such as block, ring, segment and [...]
Magnet Production Flow and Magnet Quality Control - To allow our customers to use our high-quality products with peace of mind, HANGSENG Magnets provided inspection reports. Production Flow and Quality Control The main items of inspection data in the inspection reports are as follows: Main items in the inspection report Equipment name An [...]
Magnet Machining Process Magnet Machining Process - Magnets that have been through the sintering process are machined and plated. Machining Due to shrinkage from the sintering process, required measurements are achieved by grinding the magnets with abrasives. Diamond abrasives are used for this process because the magnet is very hard. machining Surface Treatment (Plating) [...]
Magnet Sintering Process Magnet Sintering Process - Separation / Reflinement Beginning with rare earth ore, high purity rare earth oxides are separated and refined. Measurement of Raw Materials Additives such as rare earth metals, iron, cobalt and others are measured to produce the desired composition. The materials are then melted in a vacuum induction furnace as shown below. measurement-of-raw-materials [...]
How SmCo and Neo Magnets are Made SmCo and Neo Magnets - Suitable raw materials are melted under vacuum or inert gas in an induction melting furnace. The molten alloy is either poured into a mold, onto a chill plate, or processed in a strip caster – a device that forms a thin, continuous metal [...]
