What are holding magnets? Holding Magnets / Holding Solenoids Electro-holding magnets (holding magnets) remain able to be magnetised. Workpieces in position due to magnetically created forces. Pieces that are unable to be magnetised are able to be held on a magnetisable armature plate. The specific design of the magnetic circuit maximises the holding force for [...]
Battery Powered Electro Permanent Magnets BATTERY POWERED - NO POWER SUPPLY CABLE NEEDED ELECTRO PERMANENT LIFTING MAGNETS WITH BATTERY SUPPLY For safe lifting of flat and round workpieces. Equipped with AUTO function for fast unloading of cutting machines. Control via built-in digital push buttons or via the supplied radio remote control. BATTERY POWERED ELECTRO PERMANENT [...]
Electro Permanent Magnetic Chucks for Workholding ELECTRO PERMANENT MAGNETIC CHUCKS FOR LATHES Tension-free clamping of rings and precision mechanical parts, with the possibility of finishing the inner surface, outer surface and head surface in one set-up. The Series electro permanent magnetic Chucks are designed with circular electro permanent magnets, using the unique variable pole cross-section [...]
ELECTRO PERMANENT MAGNETS FOR AUTOMATION A magnetic gripper is a transmission device that can clamp ferromagnetic charges by a strong electro permanent magnet. The “double magnet” technology uses the electric current only during the magnetising and demagnetising phase. The effective force is generated by permanent magnets. In the event of a power failure, the workpiece [...]
Electro Holding Magnet – Things You Need to Know What Is A Holding Electromagnet? Holding electromagnets are used to attract and hold ferromagnetic pieces. The maximum force efficiency is achieved with the piece to be hold above the attraction’s face and in direct contact with both poles (outside pole and inside pole). How Does A [...]
Electromagnetic Transmissions Solenoids Holding Magnets Solenoids for simple operation Single-acting solenoids are for common applications. The magnetic field delivered by the coil upon power-up attracts the core. Then, the nucleus becomes free again in the absence of current. They are thus available in different designs, folded sheet, square profiled, machined in the mass. Solenoids for [...]
Energise to Hold Electromagnets / standard Electromagnets / Solenoid/Electromagnet Electrical current is required to turn the magnet ON. Power is removed to turn the magnet OFF. Pull force conversion (approximate): 1kg = 10N = 2.2lb. The outer shell of the electro magnet is a sturdy bright nickel plated cylinder, passivated with body mounting. Designed for [...]
TECHNICAL EXPLANATIONS FOR ELECTROMAGNETIC HOLDING MAGNETS Our products conform to the production standard DIN VDE0580 and are RoHS-compliant. TYPES OF HOLDING MAGNET Electromagnetic holding magnets: The ferromagnetic part is held in place on the holding magnet’s attraction surface when power is supplied to the coil. When the holding magnet is not powered, the electromagnetic force [...]
Electro Circular Magnets EHRP-ND electro-permanent magnets consist of a circular permanent-magnetic adhesive system and from an excitation winding permitting neutralized in the ON state, the magnetic field to the adhesive surfaces and thus the removal or withdrawal of the workpiece. Because of the permanent-magnetic character of EHRP-ND round magnets these are preferably used where long [...]
