Injection Molded Bonded Samarium Cobalt Magnets, Bonded SmCo Injection Molded Samarium Cobalt Bonded Magnets can be made by combining SmCo powders with Nylon 6, Nylon 12, PPS and other resins. The ratios between magnetic powders and resins are endless, therefore many grades exist depending on magnetic performance, temperature resistance, and mechanical strength. These materials can [...]
Bonded Mould Compression NdFeB Magnet Compression bonded magnets are composed of a special form of NdFeB powder with adhesive and using compression molding techniques in simple tools, it can be quickly machined into complex shapes. Since its materials are isotropic, bonded NdFeB magnet can be magnetized in any direction or with multiple poles. Special magnetizing [...]
What is Bonded NdFeB Magnets Bonded NdFeB Magnets are produced by melt spinning a thin ribbon of the Nd-Fe-B alloy. The ribbon contains randomly oriented Nd2Fe14B na no-scale grains. This ribbon is then pulverized into particles, mixed with a polymer and either compressed or injection molded into bonded magnets. Bonded magnets offer less flux than [...]
Plastic Bonded & Molded Magnets, Plastic Magnets - Compression Bonded and Injection Molded Rare Earth (NdFeB, SmCo), Ferrite, Alnico and Hybrid Magnets Plastic Bonded Molded Magnets: Compression Bonded Magnets Injection Molded Magnets Powdered NdFeB, SmCo, Alnico and Ferrite with a binder Hybrid magnetic powder combinations possible e.g. NdFeB plus Ferrite May require a dedicated press [...]
