The Present Situation And Prospect Of AlNiCo Industry As is known to all, since the AlNiCo magnets came out in the 1930 s, was widely used in many areas. Especially in the '60 s to reach peak, the world has an annual capacity of 40000 tons of AlNiCo magnet, but by the 70 s began [...]
Brief Introduction of Sintered Alnico Magnet Alnico magnet has got a lot of attention after discovered by Tokushichi Mishima in 1931. Alnico magnet is still occupying the important position among the consumption structure of permanent magnet even this days due to its several advantages. Alnico magnet can be divided into sintered Alnico magnet and casting [...]
Cast AlNiCo Manufacturing Process Alnico magnets are manufactured either by casting or sintering. Alnico is produced by conventional foundry methods using resin bonded sand molds or powder metal manufacturing methods. Sintering Alnico is suitable for complex geometries. Most Alnico produced is anisotropic meaning that the magnetic axle of the grains is oriented in one direction. The [...]
Cast Alnico Magnets Stock Cast Alnico Magnets Stock: The HSMAG list here are very small part of our stocks, with 16 years production, we have produced more than 10 thousand of magnets which have different shapes, different grades, different sizes as customer requirements. And for long term customers, we will prepare stocks for them that can fast [...]
Alnico Grade - Alnico is produced by either a sintering method or, more commonly, a casting method. The as cast or as sintered shape is acceptable for many applications but surfaces may need to be ground for a smoother surface finish. The as cast look has darkened edges with a slightly rough texture (due to [...]
