SMC – Soft Magnetic Composite

The main material of SMC(Soft Magnetic Composite) is the high purity iron powder, insulated on the surface, pressed with the powder metallurgy tech, heated to be the SMC cores. The ‘new’ of SMC is shown in the ‘low’ high frequency eddy losses, high saturation induction intension, and being easily processed to be the complex 3D structure. In application SMC can make motors small, reducing power consumption, saving wire and easy assembling etc.

SMC - Soft Magnetic Composite

SMC – Soft Magnetic Composite

SMC Advantages

SMC(Soft Magnetic Composite) is developed in order to replace traditional silicon steel sheets, it has below advantages compared with silicon steel sheets:

I. Low iron losses while running in high frequency:There is an insulating protective frlm on the surface of every particle of the materials to make high electrical resistivity, so the eddy current losses are reduced to a large extent.

II. Raising material utilization: With PM formed, the material utilization is beyond 95%.

III. Easy pole shifting: Do not need magnetic orientation, also can be designed in 3D structure.

IV. Low heating:As for the low eddy current losses and high efficiency make the low energy consumption, so heating is improved while motors run in high frequency.

V. Precise tolerance: The dimension is completely controlled by module to make the size precise and surface smooth.

VI. Reducing motor cost: SMC cores can be processed in 3D structure to shorten axial size to save wires.

VII. Lower Magnetostrictive coefficient: Obvious reducing motor noise.

 

smc_applicaiton

smc_applicaiton

NdFeB Bonded Magnets

Strong Motor Permanent NdFeB Bonded Magnets

Strong Motor Permanent NdFeB Bonded Magnets, Compression Molding NdFeB Magnets, Isotropic or Anisotropic Bonded Neodymium Iron Boron Magnets, Bonded neodymium permanent magnet China supplier Strong Motor Permanent NdFeB Bonded Magnets Feature: Part No.: BNMPC-20 Type: Permanent Composite: Neodymium Magnet Size: Custom Application: Motors, Devices, Printers, Sensors, CD/DVD ROM and so on. Packing: cartons / pallets Delivery Date: […]

 

Compression Molded Neodymium Magnets

Compression Molded Neodymium Magnets

Compression Molded Neodymium Magnets, Compression Molding NdFeB Magnets, Bonded Neodymium Iron Boron Magnets, Bonded neodymium compression permanent magnet, Isotropic or Anisotropic magnets China supplier Compression Molded Neodymium Magnets Feature: Part No.: BNMPC-19 Type: Permanent Composite: Neodymium Magnet Size: Custom Application: Motors, Devices, Printers, Sensors, CD/DVD ROM and so on. Packing: cartons / pallets Delivery Date: 10-18 days […]

 

Compression Molding NdFeB Magnets

Compression Molding NdFeB Magnets

Compression Molding NdFeB Magnets, Bonded Neodymium Iron Boron Magnets, Compression Molded NdFeB Magnets, Bonded neodymium compression permanent magnet, Isotropic or Anisotropic polymer bonded magnets China supplier Compression Molding NdFeB Magnets Feature: Part No.: BNMPC-18 Type: Permanent Composite: Neodymium Magnet Size: Custom Application: Motors, Devices, Printers, Sensors, CD/DVD ROM and so on. Packing: cartons / pallets Delivery Date: […]

 

Bonded Neodymium Iron Boron Magnets

Bonded Neodymium Iron Boron Magnets

Bonded Neodymium Iron Boron Magnets, Injection / Compression Molding NdFeB Magnets, Bonded neodymium injection magnet, Polymer Bonded Ndfeb Permanent Magnets, Isotropic or Anisotropic bonding magnets China supplier Bonded Neodymium Iron Boron Magnets Feature: Part No.: BNMPC-17 Type: Permanent Composite: Neodymium Magnet Size: Custom Application: Motors, Devices, Printers, Sensors, CD/DVD ROM and so on. Packing: cartons / […]