Shuttering Profile / Shutters / Form Works by HSMAG
After lowering the shuttering profiles on the marking the integrated magnets are activated and locked. The shuttering profile is pressed precisely to the shuttering by the integrated magnets.
Shuttering profile / Shutters are manufactured / custom-made as per client’s drawings for Length, Height and Shape, with or without Chamfers, with vertical or inclined shuttering, with milled or not milled to produce walls of thickness ranging from min. 80 to max. 350 mm.
The profile can be flat, tongue and groove shaped in accordance with specific design, with steel or rubber-steel chamfers. The thickness of shuttering profile is decided on quantity & load and equipped with lifting hooks for overhead travelling crane. The litter the better & less fatigue for labor to handle it.
Robotic shuttering: – To increase the level of automation a Robot can be employed to not only place but also strip shuttering. The shuttering robot selects the required shutters from a store and places these precisely on the pallet surface. Special, non-standardized shuttering is placed manually on the pallet surface at additional workstations. The stripping robot identifies the shutters by scanning the pallet and then removes them automatically. Two pins act as gripping points for the shuttering robot and serve for stacking the magazine.
Designed for supporting wooden forms with a Shuttering Magnet also called as Button Magnet. The Bracket is bolted to the Button Magnet and screwed to the wooden form component.
Grout Connection Tube Magnet, High Grout Tube Magnet, Threaded Grout Connection Tube Magnet The Grout Connection Tube Magnet is designed to fit into the end of the Concrete Grouted Connection tube to create a solid mount to the steel form as well as prevent leakage into the void from the concrete. This design does not create a […]
Styrofoam Magnets, Styrofoam Mag Plate, Styrofoam Magetic Plate, Styrofoam Magnet Star Plate Styrofoam Magnets are designed to pierce Styrofoam form components. A set of strong reliable magnets built into the base hold the Styrofoam form components tightly in position during the placement of concrete. Part NO.: HSUSA-SHMP Styrofoam Mag Plate HSUSA-SSTAM Styrofoam Star Mag Plate
Steel Embedded Wood Plate Magnet, Steel Embedded Wood Magnet, Steel Embedded Plate Magnet, Miscellaneous Magnets Steel embedded plate magnet designed to be screwed on to wood to suspend the steel embedded plates on the top of wall panels and attach plywood backed form liner to a form. Part No.: HSUSA-WMMP Size: 3/8″ high X 4″ […]
Bulb Tee Magnet, Dayton Bulb Tee Magnet Bulb Tee Magnet is designed to produce a through hole in the concrete for the flange. This will allow contractor to install the flange over the bracket for installation of the concrete bridge deck. Dayton Bulb Tee Magnets Part No.: HSUSA-BT
Form Liner Magnet, Embedded Form Liner Magnet, Embedded Magnet The Form Liner creates a textured concrete product. Using Embedded Magnet helps assure placement and error free concrete casting. Part No.: HSUSA-FLM001 Embedded Form Liner Magnet (Image with one piece and no through hole) HSUSA-FLM002 Embedded Form Liner Magnet (Image with magnet and plate) also as shollow pot […]
Cam Magnet, Flat Cam Magnet, Floating or Hole Former, Cam Magnet with Notch, Shuttering Magnets The Cam Magnet is designed to be released from the steel form using built in cam release arm. The magnet has strong adhesion capacity of 1000 pounds per square foot along its sides and bottom. Available in different styles: Flat, Floating, Hole Former and […]
Button Magnet Wood Bracket, Shuttering Magnets with Bracket, Magnetic Boxes Mounting System with Adapters or Bracket, Form Wall Support Magnets, Magnetic Block Wood Bracket Button Magnet Wood Bracket – Designed for supporting wooden forms with a Button Magnet. The Bracket is bolted to the Button Magnet and screwed to the wooden form component. These magnets are used to attach to a […]