Permanent Magnetic Concentrator, Permanent Magnet Magnetic Concentrator Separators
Permanent Magnetic Concentrator offered are highly functional range of Permanent Magnetic Concentrators that provide for easy movements from one place to another and also require least maintenance and recurring operation costs. Finding application in lifting of long length M.S. sheets using multiple magnets in series position, these can be made available in different lifting capacities including 100kg, 200 kg and others.
Highly functional range of Permanent Magnetic Concentrators
Provides for easy movements from one place to another
Require least maintenance and recurring operation costs
With operations based on permanent magnet, these do not require electricity support
Can easily lift long length M.S. sheets using multiple magnets in series position
So not require battery backup as other systems require
Can be made available in different lifting capacities including 100kg, 200 kg and others
Suitable for concentrating materials requiring high percentage of ferrite composition
Also suitable where magnetic/mechanical agitation is needed for meeting the separation demands of ferrous impurities
Ideally suited for up-gradation of steel/brass/aluminum turning, sponge iron/cast boring, chips
Also used for purification of dry ceramic & refractory materials
Supports removal of iron contamination
Least maintenance and recurring costs
Being a permanent magnet, these also do not require electricity support
Have ability to lift long length M.S. sheets using multiple magnets in series connection
APPLICATIONS OF MAGNETIC CONCENTRATOR SEPARATOR
Permanent Magnetic Concentrator Separators is extensively used for advancing or concentrating material containing a very high percentage of magnetic or where magnetic/mechanical agitation is required for the separation of many difficult materials. It is perfect for the improving Sponge Iron/Cast Iron borings, Steel/Brass Aluminum turnings, Chips and for mineral beneficiation application such as the purification of dry ceramic and refractory materials, reclamation of abrasive grains, removal of iron contamination from chemical powders and grains and for many other such applications requiring maximum separation with minimum production loss etc.
The Magnetic Concentrator Separator basically consists of:
An electromagnetic Vibratory Feeder (with sub-hopper) which provides step less regulation of feed for even flow.
Two Conveyor belts The Upper belt running ahead of the lower conveyor belt and in the same direction.
Super power Permanent Magnet assembly is picking Tramp Iron from the feed Conveyor.
Magnetic and Non-Magnetic Material eill be collected in two different.
Compact hollow shaft Gearbox & Motors will be provided to drive the belt conveyor.
The Supporting Structure and mounting arrangement :
The material to be treated is fed from the vibratory feeder on to lower belt where after traveling a short distance it comes under the belt conveyor. The upper belt conveyor runs under a series of powerful Permanent Magnets arranged in such a manner so that the material is exposed during its travel through a number of magnetic fields of alternating polarity. Due to the continuous repetitive agitation of the material nonmagnetic material falls back on to the lower conveyor belt, while the magnetic material is retained on the upper conveyor belt due to the force of magnetic attraction. The separated material are carried and deposited into the respective magnetic and non-magnetic discharge chutes.
The Separator is available in a wide range of sizes and capacities up to approx. 100 TPH and 650mm belt width up to 2000mm belt width.
Options available at extra price:
A variable speed drive motor can be furnished in place of the slandered constant motor if varied products are to be handled. The built-in feeder and motor starter can be furnished separately for remote mounting where remote control is desired. Multiple-stage units can be supplied for unusually difficult materials. Other sizes on request.