The Permanent Lift Magnets are designed and made for powerful lifting and safe use. These compact lift magnets are used for holding, carrying and releasing round or flat ferrous parts without any electrical power supply.

Permanent Lifting Magnets

Permanent Lifting Magnets

Safe and easy operation:
The handle controls an inner magnetic system for safe and easy operation. When the handle is in the “off” position the Lift magnet has almost no magnetic pull. After you press a button on the top of the handle and turn it  to the “on” position, the lift magnet will have attracting pull to a steel load. For more safety, the handle has been locked at this position by a “Lock Pin” and the lift magnet will keep full magnetic pull until you manually slide back the Lock Pin and turn the handle back to the “off” position.

Compact yet powerful:
Thanks to Neodymium magnet and special magnetic design, the Lift Magnets have small size and light weight compared to the  powerful lift capacity.

Constant and stable magnetic power:
The Lift Magnets have high resistance to demagnetization and is shielded  from outside magnetic interference with mild steel case. The lifting value will keep constant and stable.

Disadvantage:
The Lifter can only used below 148°F. It will lose it lifting power above this temperature. It is not good to lift a thin steel plate, particularly not good to lift a thin sheet from a stack of plates.

 

double-circuit-permanent-magnetic-lifter-j-series

Double Circuit Permanent Magnetic Lifters J Series

J Series Double Circuit Permanent Magnetic Lifters, Powerful Permanent Magnetic Lifter Hoist or Crane with Double Magnetic Circuit, Double Circuit Heavy Duty Lifting Magnet Made with super strong neodymium magnets Magnetic Lifters – Double magnetic circuit lifter have strong magnetic path by NdFeB magnetic materials. On and off themagnetic path is controlled by turning the […]

super-strong-permanent-lifting-magnet-i-series

Super Strong Permanent Lifting Magnet I Series

I Series  Super Strong Permanent Lifting Magnet, Manual Permanent Magnetic Lifter, Magnetic Tools Lifters, Handling Magnetic Lifter, Super Strong Neodymium Lifting Magnet Lifting Magnet – Permanent Magnetic Lifter( permanent lifting magnet) used to hold/release steel plate or iron block for lifting or handling operation. It has strong magnetic path produced by NdFeB permanent magnet. On […]

heavy-duty-permanent-magnetic-lifter-e-series

Heavy Duty Permanent Magnetic Lifter E Series

E Series Heavy Duty Permanent Magnetic Lifter, Super Strong Neodymium Permanent Magnetic Lifter, Power Lift Magnet, Universal Magnetic Lifter Magnetic Lifter Also known plate lifting magnets, the HSMAG range is the leader in lifting magnet sales worldwide. The huge power of HSMAG’s rare earth ‘neutral crown’ permanent lifting magnet technology is applied right at the lifting […]

powerful-magnetic-lifter-d-series

Powerful Magnetic Lifter D Series

D Series Powerful Permanent Magnetic Lifter, Permanent Lifting Magnet, Super Strong Magnetic Lifter, Rare Earth NdFeB Magnetic Lifter Manufacturer Powerful Magnetic Lifter – HSMAG’ ranges of high strength magnetic lifters are produced with super strong Neodymium magnets, with your safety in mind. Operation is by way of turning the manual handle once on the operating surface. Magnetic […]

manual-permanent-lifting-magnet-c-series

Manual Permanent Lifting Magnet C Series

C Series Manual Permanent Lifting Magnet, Heavy Duty Magnetic Lifter, Handling Permanent Magnet Lifter, Permanent Neodymium Lifting Magnet Permanent Lifting Magnet – Permanent Rare Earth ON/OFF Magnets These compact yet powerful Rare Earth lift magnets can be used on flat or round surfaces and contain an internal release on/off device that does not contact or […]

permanent-magnetic-lifter-b-series

Permanent Magnetic Lifter B Series

B Series Permanent Magnetic Lifter, Power Lifting Magnet, Universal Permanent Magnetic Lifter, Heavy Duty Neodymium Lifting Magnets Permanent Magnetic Lifter – A kind of material handling equipment,To suck and move the metal sheet,CE certified The main uses and characteristics 1. Widely used in machining and mould processing industry. 2. Using high-performance permanent magnetic materials, with […]