On/Off Magnetic Base Shields for Various Machinery Applications

These versatile On-Off magnet-base shields can be used on lathes, drills, mills, grinders, or any equipment that has a flat, ferrous mounting surface. The heavy-duty magnetic base is 2 3/4-inch square with a V-groove and measures 3-inches high. The 200-lb holding force keeps the shield in place when the magnet is on. If an adequate flat, ferrous mounting surface is not available, an optional steel mounting plate can be permanently attached to the machine to hold the magnetic base.

OnOff Magnetic Base Shields for Various Machinery Applications

OnOff Magnetic Base Shields for Various Machinery Applications

If an adequate flat, smooth, ferrous mounting surface is not available, an optional steel mounting plate can be permanently attached to the machine to hold the magnetic base.

The 12-inch, 18-inch, and 24-inch flexible arms are made of spring steel and are covered with vinyl to protect them from grease, oil, and contaminants that would weaken their holding power. They offer virtually unlimited adjustment possibilities and have long-term holding power.

The transparent portion of these shields is constructed of high-impact-resistant, 3/16-inch-thick clear polycarbonate. The shield places a barrier between an operator and the flying chips (swarf), sparks, and coolant generated at the point of operation. A variety of flat, angled, and concave shields are available.

The On/Off Magnetic Base Only With M12 Tap is designed to easily control the machine is a safe and non-hazardous manner for the worker.

Mounting Plate Designed for Magnetic-Base Shields – These are designed to be used in the junction between the shield and the machinery being utilized.

Magnetic-Mount Flexible Spring-Steel Replacement Arms, On/Off Magnetic Base Shields

These magnetic base chip shields can be used on lathes, small milling machines, drills, grinders, band saws, etc. These shields can be attached to any ferrous surface on the machine by an 80-lb. pull magnetic base. If a flat, smooth, ferrous surface is not available, a mounting plate (3 1/2″ x 4 5/8″) is also furnished. Large polypropylene plastic handles are used for easy positioning and locking.

The transparent portion of the chip shield is constructed of high-impact-resistant, 3/16″-thick clear poly-carbonate material. It is furnished with a circular base which measures 3 1/4″ in diameter. An 8″ aluminum base extrusion is provided and attaches to the magnetic base. Also available is a 12″ extruded-aluminum arm extension. This arm can be cut to a shorter length if required for your application.

Precision Magnetic Base

PC Template Inserted Fixing Magnetic Base

Rubber Coated Magnetic Base D43 M4

What magnetic base accessories are available?

Magnetic Base Magnetic Force