Magnetic Studs, Stud Magnets use method, magnetic tool holder
With these simple magnetic studs, you can add a magnetic tool holder just about anywhere you can drill a 1/4″ hole.
With a 5/8″ diameter head, the black oxide finished steel body has an embedded 1/2″ rare-earth magnet at one end and a wide-thread screw base at the other. The studs can be screwed into standard 1/4″ hole pegboard, or into predrilled pilot holes in wood or drywall; their aggressive threads provide excellent pull-out resistance.
The sides of the stud heads are knurled for grip, letting you screw them in by hand. The studs project 3/8″ when mounted, providing tools enough stand-off to make them easy to grasp with fingertips. A soft, high-friction disc on the magnetic face makes them non-marring in use.
While the magnet is strong enough to hold items up to 1 lb, the pull-out resistance of the stud is considerably higher; any tool on the magnet will release before the stud can be pulled from the wall.
Sold in packages of four. Made in China by HSMAG.