Cylindrical Magnet Magnetic core AlNiCo magnetic system
Magnetic core AlNiCo Cylindrical Magnet without fit tolerance – The holding surface is polished.
magnetic-core-alnico-cylindrical-magnet-without-fit-tolerance
In order to fully take advantage of the holding force specified, allow a protrusion of approx. 1.5 mm above the installation surface when installing the magnetic system or enlarge the mounting borehole around the holding surface of the magnetic system by 3-4 mm. A socket made of a non-magnetizable material (AI, Ms, Ku) is also favourable. Magnetic core AlNiCo – If only a direct installation in steel is possible, a holding force reserve of 30 percent should be taken into account when selecting the size of the magnetic system.
| Cylindrical, Magnetic core AlNiCo, without fitting tolerance | ||||||
|---|---|---|---|---|---|---|
| operating temperature: up to 450 °C | ||||||
 magnetic-core-alnico-drawing |
Dimensions in mm | KM* | Weight | Holding force¹ | Part no. | |
| D | L | g | N | |||
| 6 | 20 | 12 | 4 | 1.5 | HS38.300 | |
| 8 | 20 | 11 | 7 | 3.5 | HS38.301 | |
| 10 | 20 | 10 | 11 | 7.0 | HS38.302 | |
| 13 | 20 | 9 | 19 | 10.0 | HS38.303 | |
| 16 | 20 | 5 | 29 | 18.0 | HS38.304 | |
| 20 | 25 | 6 | 57 | 42.0 | HS38.305 | |
| 25 | 35 | 10 | 140 | 96.0 | HS38.306 | |
| 32 | 40 | 8 | 240 | 180,0 | HS38.307 | |
| 40 | 50 | 10 | 500 | 240.0 | HS38.308 | |
| 50 | 60 | 12 | 900 | 420.0 | HS38.309 | |
| 63 | 65 | 10 | 1400 | 660.0 | HS38.310 | |
| Other dimensions on request | ||||||
* You may shorten the system by the dimension KM without reducing the holding force. Tolerances: D ± 0.1 mm, L ± 0.2 mm.
1) The holding forces have been determined on a polished plate made of steel (S235JR according to DIN 10 025) with a thickness of 10 mm by pulling the magnet vertically from the surface (1kg≈10N). A deviation of -10 % (max.) in the stated values is possible in exceptional cases. In general, the value will be exceeded. Small cracks in the magnetic material do not affect the holding force.
Cylindrical Pot Magnets AlNiCo steel body with fitting tolerance h6
AlNiCo Deep Pot Holding Magnets, Bi-pole Magnet Cylindrical Pot, Bar Magnets AlNiCo steel body with fitting tolerance h6, AlNiCo-Rod Deep Blind Ended Pot Magnet Cylindrical Pot Magnets feature: Pot magnets have both poles at the same end arranged concentrically Alnico 5 magnet material and mild steel pot body Made by casting aluminum, cobalt and nickel with iron and other metals […]
AlNiCo Deep Pot magnet steel body cylindrical pot
AlNiCo Deep Pot magnet, AlNiCo Pot magnet cylindrical without fitting tolerance, Bar magnets AlNiCo steel body, cylindrical deep pot holding magnets AlNiCo Deep Pot magnet feature: Pot magnets have both poles at the same end arranged concentrically Alnico 5 magnet material and mild steel pot body Made by casting aluminum, cobalt and nickel with iron and other metals […]