Magnetic compound material is mixed by ferrite magnetic powder and plastic resin in mixer, through mix ,smelting, cooling, shaping and cutting process to produce final magnetic compounds. We uses imported automatic production line to manufacture magnetic compounds, which have high peqrformance, good flexibility and stable granularity. magnet powder
According to different producing technics, there are two kinds of magnetic compound material: injection purpose and extrusion purpose.
Injection magnetic compound is mainly used for producing Bonded magnets for permanent DC motor, stepper motor, printer and Magrollers of photocopier, bounce cylinder, inductor and Teletron gathering piece. Extrusion magnetic compound is mainly used for producing refrigerator door gaskets and other door seal gaskets.
Rubber magnetic compound consists of ferrite powder and synthetic rubber. This magnetic compound is mostly for the manufacturing flexible rubber magnet for use in refrigerator gasket and other products through extrusion.
We can supply both Barium Ferrite and Strontium Ferrite Magnetic Compounds in huge quantities.
The compounds can be used for making different kinds of flexible magnetic strip and sheets by extrusion or calendaring.
Granular magnetic compounds consist of 90% bonded magnetic ferrite powder and around 10% synthetic rubber-plastic materials. All the additive have been put into the magnetic compound. The magnetic compound can be fed into the extruder directly to extrude magnetic strip without adding any chemicals. We can also make the magnetic compounds according to the properties required by clients.
Typical products of Magnetic Compound
Bonded Ferrite Magnets, Ferrite Bonding Magnets, Injection Moulded or Compression Bonded Ferrite Magnets Bonded Ferrite Magnets are manufactured by mixing magnets with binders like epoxy. These bonded magnetic materials can be either Injection Moulded or Compression Bonded. Normally there are two types of bonded ferrite magnets – ferrite rubber bonded magnet and ferrite-plastic bonded magnets. Ferrite-rubber bonded magnets are […]
Bonded Neodymium Magnets, Permanent Bonded NdFeB Magnets, Compression and Injection Moulding Bonded Magnets Bonded Neodymium Magnets (Bonded NdFeB) is produced by mixing plastic binders with NdFeB powder: they allow the merging of high rare earth performances and bonded magnets potentialities. Permanent bonded magnet for professional use. The process to obtain this NdFeB powder was born in the same age of sintered NdFeB […]
Injection Molded Bonded Magnets, Injection Plastic NdFeB Magnet, Injection Molding Bonded NdFeB, Injection Molded Magnet Injection molded bonded magnets are available using ferrite, neodymium-iron-boron, or blends of magnetic materials to achieve an extensive range of properties. Binder types include Nylon 6 and 12, PPS, and Polyamide. The binders and magnetic alloys are capable of a wide range of […]