Magnetic Capacity Measurement

1. Magnetic capacity measurement

a) Magnetic Properties: Br, Hcb, Hcj,(BH)max, Hk, Ms,μrec, Hk/ Hcj etc.

b) The test instrument used is the Hysteresisgraph tester.

c) Hcj value between 50 and 20,000 Oe can be measured.

2. Magnetic Properties at high and low temperatures
(-40 to 250 ºC): Properties tested at any temperature as above within the specified range.

Magnetic Capacity Measurement

Magnetic Capacity Measurement

3. Reversible Temperature Coefficients
Measured and calculated for any range desired within the specified temperature ranges.

4. Magnetic field waveform distribution
Linear, Planar and Rotary. Data and graphic output can be provided for magnets up to approximately 0.03 cu.metre

5. Fluxmeter measurements
Magnetic dipole moment, total magnetic field output and error angle measurements. Several measurement systems are available with the Helmholtz coil; highly flexible manually operated systems and automated systems.

6. Gauss measurements
Single measurements at specified locations or measurements using C-fixtures, yokes or of customer-specified design.

Physical and Corrosion resistance Test capacity

1. Salt Spray
This is a characteristics test performed to ASTM B-117. Results are usually expressed as “time-to-failure.” Photographs tested can also be provided.

2. High-temperature & high-humidity measurement
Test conditions are typically set between 80 and 95 ºC and between 90 and 100% RH. The most common setting is 90 ºC and 95% RH. This is usually a characteristics test.

3. Autoclave, Un-coated magnets
Often called the PCT test, it is a weight-loss test performed at 2 atmospheres、150ºCand 100% RH. The duration is 96 hours, but can be adjusted according to customer requirements.

4. Autoclave, Coated magnets
This is a characteristics test looking for lack of failure at specified test duration. Test conditions can be selected ranging from two atmospheres, 100% RH to HAST test conditions.

5. Physical Strength
Our Crushing strength tester can be configured for tensile (pull), 3-point bend or for peel testing.

Various Shaped Plastic NdFeB Magnets

Various Shaped Plastic NdFeB Magnets

Various Shaped Plastic NdFeB Magnets, Rare Earth Neodymium Polymer Magnets, Plastic Bonded NdFeB, Multipole Bonded NdFeB Permanent Magnet China Factory Various Shaped Plastic NdFeB Magnets Feature: Part No.: BNMPC-12 Type: Permanent Composite: Neodymium Magnet Size: Custom Application: Motors, Devices, Printers, Sensors, CD/DVD ROM and so on. Packing: cartons / pallets Delivery Date: 10-18 days Place […]

 

Rotor Multipole Radial Magnet Ring

Rotor Multipole Radial Magnet Ring

Rotor Multipole Radial Magnet Ring, Rotor Radial Multipole Magnetic Rings Assembly, Multi-pole Magnetized Magnets, Bonded Neodymium Radial Multipolar Ring, Bonding Multipole Radial Magnetic Rings, Sensor Magnet China Manufacturer G58A Radial Multipole Ring – 3 5/8″ – Multipolar Radial Ring Magnet Assembly Part No. HSRMR-G58A Four grades of magnetic materials Cost effective design High resistance to […]

 

Multipolar Radial Ring Magnet

Multipolar Radial Ring Magnet

Multipolar Radial Ring Magnet, Radial Multipole Magnetic Rings Rotor Assembly, Multi-pole Magnetized Bonding Magnets, Bonded Neodymium Radial Multipolar Ring, Multipole Radial Magnetic Rings, Sensor Magnet China Manufacturer G58H Radial Multipole Ring – 3 5/8″ – Multipolar Radial Ring Magnet Assembly Part No. HSRMR-G58H Four grades of magnetic materials Cost effective design High resistance to demagnetization […]

 

Radial Multipole Ring Assembly

Radial Multipole Ring Assembly

Radial Multipole Ring Assembly, Radial Multipole Magnetic Rings Assembly, Multi-pole Magnetized Bonding Magnets, Bonded Neodymium Radial Multipolar Ring, Multipole Radial Magnetic Rings, Sensor Magnet China supplier G32B Radial Multipole Ring – 2″ – Radial Multipole Magnetic Rings Assembly Part No. HSRMR-G32B Four grades of magnetic materials Cost effective design High resistance to demagnetization Operation from -40°C […]