HSMAG Customer Magnet Quotes
The following is the main content of some customers’ order and quote inquiries about magnetic components and magnets:
1 I WANT TO BUY AND SEND ME TO GREECE 32 PIECES N50 50X30X20
IS IT POSSIBLE? AND WHAT IS THE PRICE WITH TRANSPORTATION.
2 How much is your cone magnets 1/2 inch at the base 2 with North on the top and then also south on the top .Price four 12 of them 12 North on the top 12 South on the top. thank you
3 We are working on a device that has a magnetic pin-lock mechanism and need a magnet with handle that can be used to release the pin. do you have any safety covers for the exposed magnet face? (for storage)
4 Can you make a ring magnet 60mm od, 8mm id, and shape it into a cone shape with the north pole in the inside and another cone with the north pole on the out side. Is a nickle coating much more expensive than zinc?
5 we need ferrite magnets, rings 60*24*6, Y40, Hcj>4700Oe, 3500 pcs, at TEHNOMAG” Ltd,
Sheremetyevo airport, Moscow Russia/ We need urgently 300 pcs
6 Dear Cordial,
I am from *** S.A. in Colombia
We would appreciate your help for quote the following items; we like to know delivery terms, price conditions and time of delivery.
Permanent magnet zinc
N35 D6*T2mm Zinc coating —-50,000 units
D3*T2mm Zinc coating —- 25,000 / 50,000 units (please send us pictures)
7 Our company is titan engineering in India. We are required ndfeb magnets for elevator traction motor as per our drawing and specification.
for drawing and specification pls, see the attached file.
8 Hello Need two ring magnets and two ring magnets to fit inside the other two magnets that repel each other and four regular flat round magnets,to make a small windmill. It all depends on the cost and the sizes that you have. please send a quote for all sizes ,and I will see if I can make something work Would appreciate any help you could give me.
9 Dear Sir or Madam—
Could you tell me how much you would charge to send two Alnico 5 polished short magnets suitable for putting into a standard humbucker? My shipping zip code is 15217.
10 I have to made prototype system,
I wont use AS5306A SENSOR model 1,2 mm LP_FP pole pitch, 2,4 mm TFP pole pair length we use AS5306A.
If possible diameter 40 mm or near, please if possible send 3 sample for test and price per Quantity es 0-10. 100. 500. 1000
11 Dear, Please inform about this product: SWd-NR-150 Magnetic Drawers with Round Inlet And Outlet feature:
please inform price, delivery time. Start need 1 pcs. next need 10-100 pcs
12 What is the hole size tolerance for part number 5685K31?
I am looking for mini electromagnets and would like documentation and quotes on the models pictured. I’m looking to replace a 1/8″ diameter x 1/2″ long neodymium magnet.
14 we use 1,000’s of your D66 magnet and was wondering if I could get a sample to compare our existing magnet with yours? We currently have needs for around 10,000 of these so if you could quote price and delivery I would appreciate it.
15 I’m looking for rubber-coated magnets to use in our bathroom to hold a shower curtain. Your neodymium disc magnets look like a good option. Do you have anything with a knob attached that’s fully encased in rubber?
16 We prepare some product where we need measure angle.
I loking for informatium about where i can buy this magnet ring in Europe. Its posible to get some samples of this product ?
DES Technology, Poland
17 1- Molded Rubber magnet
Ceramic Sandwich Magnets Assembly Specifications:
Material: Ceramic Magnet + 2 Steel Plates
Width: 0.844 inch
Length: 2.094 inches
Height: 0.844 inch
Thickness: 0.313 inch
Lift Strength: 22 lb.
Weight: 1 lb.
18 Hello, I would like a quote for 8 Alnico 5 solid cylinder magnets of 4.8mm diameter and 8mm length.
I am asking on behalf of the student run University of Saskatchewan Space Team (USST) CubeSat project RADSAT-SK. Our website is usst.ca. The magnets will be part of passive attitude control system for satellite’s low Earth orbit for a 1-year mission.
The most preferable solution would be 2 sets of 4 magnets of equal strength that have a combined magnetic moment between 0.75 to 1.00 A*m^2 but that is a difficult to achieve with such small magnets.
If you any questions or require clarifications, please ask.
19 Looking for a Ring Shaped Micro Neodymium Magnets Ф3.1*Ф2.1*1.0mm. for encoder sensor.
20 I only need 2 of these for a project I’m working on. Is this something you can accommodate?
Multi Poles Bonded Neo Ring Radial Diametrically Magnet, Diametrically Magnetized Multi Skew Poles Radially Ring Neodymium Magnets, Bonded Ndfeb Multi Poles Radial Ring Magnet, 45 degree Skew Magnetized 8 Poles Multipolar NdFeB Ring Magnets Multi Poles Bonded Neo Ring Radial Diametrically Magnet Item Specifics: Grade: NB10 (Br: 680-730mT, Hcj: 640-800KA/m, BH Max: 76-84 KJ/m, HCB: […]HSMAG Customer Magnet Quotes
Multi Skew 8 Poles Radial Ring Ndfeb Magnet N40H, Diametrically Magnetized Multi Skew Poles Radially Ring Neodymium Magnets D32mm, Bonded Ndfeb Multi Poles Radial Ring Magnet, 45 degree Skew Magnetized 8 Poles Multipolar NdFeB Ring Magnets Multi Skew 8 Poles Radial Ring Ndfeb Magnet N40H Item Specifics: Size: Outer Diameter 32mm, Inner Diameter 25mm, Thickness […]HSMAG Customer Magnet Quotes
Multi Poles Radially Oriented Diametrically NdFeB Ring N52, Super Strong Radial Ring Rare Earth Neodymium Magnet, Large diameter radiation ring sintered neodymium iron boron magnets, Multi Skew Poles Radial NdFeb Ring STRONG powerful magnet Multi Poles Radially Oriented Diametrically NdFeB Ring N52 Features: Shape: Ring Grade: N52 Material: Sintered Ndfeb Magnets Dimension: O.D. – 100mm, I.D. […]HSMAG Customer Magnet Quotes
Super Rare Earth Radial Ring Neodymium Magnet N52, Multi Poles Radial Magnetized NdFeb Ring Magnets, Large diameter radiation ring sintered neodymium iron boron, Multi Skew Poles Radially Oriented Diametrically NdFeb Ring Magnets Super Rare Earth Radial Ring Neodymium Magnet N52 Features: Shape: Ring Grade: N52 Material: Sintered Ndfeb Magnets Dimension: O.D. – 70mm, I.D. – […]HSMAG Customer Magnet Quotes