FEATURES OF Injection Molded Magnets

Our injection-molded magnets offer tremendous design versatility allowing engineers to add unique features to the magnet or magnet assembly that cannot be easily obtained using ceramic or sintered magnets. Injection-molded magnets are far less brittle, offer tighter tolerances, and meet magnetic requirements to a tighter tolerance. The injection-molding process can hold tolerances down to +/- .0005″ (.01mm). With this in mind you can easily see that tighter air gaps, precision press fits and intricate details can be achieved with great success.

Design features may be assembly keys, mechanical features, reduced part weight and size, inserts, and unique magnet geometry. You may also utilize the option to add a second or even third injection molding process to capture multiple design requirements in one magnetic solution!

Our experience incorporating two or three components in one molded assembly can represent tremendous cost savings. Using fabricated steel inserts is a cost-effective way of eliminating steps in the manufacturing process. Incorporating inserts in bonded-magnet design produces a product that has exceptional uniformity and functionality. Engineered thermoplastics are also an excellent choice as an alternative to steel inserts, offering the opportunity to add structural ribs, fine threads and color coding. Many binder systems can be used when injection molding magnets. Typically a nylon 6 or nylon 12 is used. Other options include PPS, EEA, or heat-resistant polyamides. When optimizing a second or third operation in the molding process, there is a very wide range of thermoplastics available to meet specific requirements.

FEATURES OF Injection Molded Magnets

FEATURES OF Injection Molded Magnets

Injection molded ferrite magnets are made with a mix between plastic polyamide and Ferrite oxide powders, through injection molding process.

Realized in complex shapes (with gears, gorges, teeth, etc.)
High precision and tight mechanical tolerances
Good tensile strength even at high rotation speeds
Possibility of overmolding on other materials

Injection molded Neodymium-Iron-Boron are magnets made with a mix between plastic polyamide and Neodymium powders, through injection moulding process.

Is it possible to realize complex shapes (with gears, gorges, teeth, etc.).
High resistance to rotational speed
Possibility of overmolding with other plastic materials
Possibility of co-molding on other parts (as steel shaft to create complete rotors)

Sintered Permanent Segment Strong Ferrite Magnets for Motor

Neodymium Magnets vs Ferrite Magnets

Strontium Barium Ferrite Magnets

Basic Knowledge Of Magnetic Materials

Injection Ferrite Seat Motor Sensor Magnet

ET/FT Type MnZn Ferrite Power Core

URS Type Mn-Zn Ferrite Core

EPC Soft Magnetic Core