When bonding magnets to steel structures, there are several items to consider.

Bonded magnet materials can be created through Injection Molded and can be made from NdFeB, Strontium Ferrite or a combination of the two. Bonded magnets that are created through injection molding can be molded into complex shapes and also molded directly onto components. Bonded magnets can also be created through the process of compression bonding which offer higher magnetic output but are limited to simpler geometries than Injection Molded materials. Compression Bonded magnets can be made from either NdFeB or SmCo powders.

Selection of Appropriate Epoxies and Adhesives
Consider the environment that the magnet or magnet assembly will be exposed to during storage and use. If the magnet or magnet assembly will be used at elevated temperatures, higher temperature adhesives and epoxies should be used. Other factors to be taken into account when selecting the appropriate bonding materials are humidity, forces the unit will be exposed to, and any other adverse condition which could contribute to a point of failure. bonded neodymium-iron-boron magnets

Substrate Surface Preparation of bonding magnets
It is better to bond to the base magnet material than a coated or plated magnet. Coatings and platings are typically applied for their ability to retard oxidation, or simply for cosmetic reasons, but not for structural integrity. Epoxies and adhesives are meant to provide structural integrity.

Nickel plating is typically very difficult to bond to. Our polymer coatings, work well with adhesives and epoxies. However, as mentioned above, they are not designed to be structural. Where possible and permissible, it is better to strip the coating, or mask the surfaces when coating so that bonding surfaces are free of coatings. If stripping the surfaces is required, do this by lightly sandblasting or using an emery cloth or sandpaper. Make sure to clean the surfaces after etching so as to remove any loose particles that may have formed due to the process.

With advanced processing and test equipment, The stablility, consistency and tolerance of our magnets can be well controled.Choose HSMAG Magnet you can experience more professional technical advice, fast quotation, ordered production plan, quality control and convenient mode of transportation. Which can support us to provide good products and timely delivery. Problem analysis in your position is always our service tenet.

Substrate Cleanliness of bonding magnets
In all cases, cleanliness is extremely important. Even a fingerprint on the surface to be bonded can lead to potential failures when high reliability is required. This is because oils and salts from the finger transferred to the substrate materials being bonded will compromise the integrity of the bond. For example, we know that cleaning the substrates prior to bonding is very important. We do not want to introduce oils or other contaminations on the bonding surfaces prior to bonding. Touching the bonding surfaces with bare fingers introduces contamination which later compromises the integrity of the bond. To avoid this potential failure point, it is important that the bonding technicians are aware of this problem and that they exercise care by handling the parts to be bonded with finger cots or gloves. It is important to extensively train and audit the assembly technicians. Habits that may appear minor can cause serious potential problems, such as scratching ones nose or wiping ones forehead while putting together an assembly. The technician may not realize he or she did this, and we would have introduced salts and oils on the bonding surfaces.

Polymer Bonded NdFeB Magnets

Polymer Bonded NdFeB Magnets

Polymer Bonded NdFeB Magnets, Permanent Polymer Bonded Neodymium Magnets, Plastic Compression Bonded NdFeB Magnets, Compression Bonding NdFeB China Factory Polymer Bonded NdFeB Magnets Feature: Part No.: BNMPC-03 Type: Permanent Composite: Neodymium Magnet Size: Custom Application: Motors, Devices, Printers, Sensors, CD/DVD ROM and so on. Packing: cartons / pallets Delivery Date: 10-18 days Place of Origin: Zhejiang, China (Mainland) Means of Transport: Ocean, […]

 

Various Shaped Plastic NdFeB Magnets

Various Shaped Plastic NdFeB Magnets

Various Shaped Plastic NdFeB Magnets, Rare Earth Neodymium Polymer Magnets, Plastic Bonded NdFeB, Multipole Bonded NdFeB Permanent Magnet China Factory Various Shaped Plastic NdFeB Magnets Feature: Part No.: BNMPC-12 Type: Permanent Composite: Neodymium Magnet Size: Custom Application: Motors, Devices, Printers, Sensors, CD/DVD ROM and so on. Packing: cartons / pallets Delivery Date: 10-18 days Place […]

 

Multi-pole Magnetized Target Wheel

Multi-pole Magnetized Target Wheel

Multi-pole Magnetized Target Wheel, Radial Multipole Ring Rotor, Bonded Neodymium Magnetic Rings Assembly, Neobond Radial Multipole Magnetic Rings for target rotor China supplier Multi-pole Magnetized Target Wheel – 5/8″ Part No. HSRMR-G10 Four grades of magnetic materials Cost effective design High resistance to demagnetization Operation from -40°C to 125°C Tough environmental endurance Very resistant to […]