50 x 50 x 25mm thick Rubber Coated N42 Neodymium Square Block Magnet with 8.2mm dia Countsunk Hole
50mm x 50mm x 25mm thick with a 8.2mm diameter countersunk hole on either side for fixing.
Excellent 84kg Pull.
Can be fixed in place with a countersink screw.
N42 Grade Neodymium.
Excellent resistance to demagnetisation and corrosion.
This magnet is little larger than a block of post-it notes but incredibly produces an astonishing pull of 84kg. These magnets are so strong that they will wipe data from hard drives and are commonly used in large scale engineering projects such as wind turbines. They come with the convenience of a countersunk hole, meaning they can be screwed into place against a surface. Countersunk magnets with opposite facing poles can be used to attract two surfaces, or two opposing countersunk magnets with the same poles facing can be used to create a damping, shock absorbing or repelling effect. This is one of the strongest countersunk magnets available on the market.
High-performance, rubber coated Neodymium (N42) square magnet with a countersunk hole on either side. Compact but incredibly strong.
Magnetic Face: 50 x 50
Kg Pull: 86
Plating: Ni-Cu-Ni (Nickel)
Performace (Gauss): 4,900
Vertical Pull: 19Kg
Max Temp (degrees C): 80
Fixing: 8mm Screw
The magnet’s rubber coating increases the amount of friction against a ferrous material and protects it from water corrosion. Additionally, the coating makes it ideal for attracting to fragile or easily marked surfaces because it softens the impact and prevents marking.
Please note, these magnets should only be handled by people who are used to handling strong magnets and once a thorough risk assessment has been undertaken as they will easily crush trapped fingers causing serious injury.