3D PRINTED MAGNETIC STIRRER FOR YOUR DIY PROJECTS
When mixing or agitating delicate solutions in the chemistry lab, a magnetic stirrer is often the tool of choice. They’re able to be easily sterilized and cleaned, while maintaining isolation between the mechanical parts and the solutions in question. While they can be purchased off the shelf, whipped up a design that can easily be built at home.
The build consists of a 3D printed base, containing a simple brushed motor. This is hooked up to a motor controller fitted with a simple potentiometer for adjusting the speed of rotation. The motor is then fitted with a small 3D printed spinner containing two magnets. A similar 3D printed part acts as a stirrer, and is fitted with a matching pair of magnets, and dropped into the solution. The magnets in the stirrer are attracted to the ones on the end of the motor, and so when the motor spins, the stirrer spins in the solution, with no physical contact required.
It’s a simple way to build a magnetic stirrer at home without having to shell out big money for a laboratory grade unit. We imagine this could be put to fun use for stirring coffee or cocktails, too – if built with a food-grade spinner. More advanced designs are also possible for the eager home scientist. Video after the break.
If you’ve spent much time in a chemistry or biology lab, you’ve probably seen a magnetic stirrer. This is a little table that you put a beaker on. A little bar (often called a flea or a pill) goes in the solution and spins to stir the beaker’s contents. Simple versions are not that expensive, but nicer ones can cost a bit. [John] decided to build his own using 3D printing and the design is delightfully simple.
The electronics is nothing more than a PC fan, an off-the-shelf fan controller with a display, and a 3D printed bracket with some magnets. The flea is also 3D printed, although we’d probably buy cheap commercial fleas since they are usually coated with Teflon or some other non-reactive substance. Depending on what you are stirring, the reactivity of your 3D printed plastic and its porosity could be a concern. In addition, a commercial flea has a pivot ring that helps it spin smoothly, although we are sure the 3D printed one will work in most cases.
The 3D printed parts are on Thingiverse. Using the fan as a motor makes things simple. The controller and fan plug together, so there’s nothing to solder. If you do go with the 3D printed flea, [John] suggests using friction welding to seal the two halves, although you could use glue as long as you aren’t planning on stirring anything that would attack the glue.
We’ve seen stirrers before but this one is cheap, easy, and looks good. This would be a great project for a school or home lab that already has a 3D printer. Some stirrers have hot plates integrated and depending on the plastic you use, this might be a good upgrade.
Aritcle from : https://hackaday.com/2020/09/03/a-3d-printed-magnetic-stirrer-for-your-diy-chemistry-projects/
C1 Ceramic Ferrite Round Disc Magnets, Industrial Strong Round Disc Hard Sintered Ferrite Magnets, custom diameter disk small or big flat round ceramic magnets, Anisotropic or Isotropic Ferrite Circle Magnets China Factory C1 Ceramic Ferrite Round Disc Magnets Features: Part No.: HS-FDM Material: Permanent Magnet, Ferrite Magnet Shape: Disc, Disk, Round, Circle As the request […]3D PRINTED MAGNETIC STIRRER
Thin Ceramic Ferrite Circle Magnets for Crafts Y30, Y30BH, Y35, Industrial Strong Round Disc Hard Sintered Ferrite Magnets, custom diameter disk small or big flat round ceramic magnets, Anisotropic or Isotropic Ferrite Circle Magnets China Factory Thin Ceramic Ferrite Circle Magnets for Crafts Y30, Y30BH, Y35 Features: Part No.: HS-FDM Material: Permanent Magnet, Ferrite Magnet […]3D PRINTED MAGNETIC STIRRER
Round Ceramic Ferrite Crafts Magnets for Refrigerator, Industrial Strong Round Disc Hard Sintered Ferrite Magnets, ceramic custom diameter disk small or big flat round ferrite magnets, Anisotropic or Isotropic Ferrite Circle Magnets China Factory Round Ceramic Ferrite Crafts Magnets for Refrigerator Features: Part No.: HS-FDM Material: Permanent Magnet, Ferrite Magnet Shape: Disc, Disk, Round, Circle […]3D PRINTED MAGNETIC STIRRER