1800 After History of Magnetism and Electricity

1820 – Electromagnetism, Current

In 1820, a physicist Hans Christian Oersted, learned that a current flowing through a wire would move a compass needle placed beside it. This showed that an electric current produced a magnetic field.

Andre Marie Ampere, a French mathematician who devoted himself to the study of electricity and magnetism, was the first to explain the electro-dynamic theory. He showed that two parallel wires, carrying current, attracted each other if the currents flowed in the same direction and opposed each other if the currents flowed in opposite directions. He formulated in mathematical terms, the laws that govern the interaction of currents with magnetic fields in a circuit and as a result of this the unit of electric current, the amp, was derived from his name. An electric charge in motion is called electric current. The strength of a current is the amount of charge passing a given point per second, or I = Q/t, where Q coulombs of charge passing in t seconds. The unit for measuring current is the ampere or amp, where 1 amp = 1 coulomb/sec. Because it is the source of magnetism as well, current is the link between electricity and magnetism.

1822 – Fourier Transforms

Baron Joseph Fourier (1768-1830) was a French mathematician. His method of analyzing waves, published in 1822, was a spinoff of his work on the flow of heat. It shows how any wave can be built up from simpler waves. This powerful branch of mathematics, Fourier Transforms has contributed to important modern developments like electronic speech recognition. Magnetism and Electricity History

1826 – Resistance – Currents Causing Heat

In 1826, the German Physicist Georg Simon Ohm, examined Volta’s Principle of the electric battery and Ampere’s relationship of currents in a circuit. He noted that when there was a current in a circuit, there was at times, heat, and the amount of heat was related to different metals. He discovered that there was a relationship between current and heat, there was some “resistance” to the flow of current, in the circuit. By discovering this, he found out that if the potential difference (volts), remained constant, the current was in proportion to the resistance. This unit of electrical resistance – the ohm – was named after him. He also formulated a law, showing the relationship between volts, amps and resistance and this law was called “Ohm’s Law” also named after him. This law as we know it today, is the basis of electricity. Magnetism and Electricity History

1830 – Inductance

In 1830, Joseph Henry (1797-1878), discovered that a change in magnetism can make currents flow, but he failed to publish this. In 1832 he described self-inductance – the basic property of inductor. In recognition of his work, inductance is measured in henries. The stage was then set for the encompassing electromagnetic theory of James Clerk Maxwell. The variation of actual currents is enormous. A modern electrometer can detect currents as low as 1/100,000,000,000,000,000 amp, which is a mere 63 electrons per second. The current in a nerve impulse is approximately 1/100,000 amp; a 100-watt light bulb carries 1 amp; a lightning bolt peaks at about 20,000 amps; and a 1,200-megawatt nuclear power plant can deliver 10,000,000 amps at 115 V. Magnetism and Electricity History

1836 – Daniell Cell

In 1836, John Daniell (1790-1845) proposed an improved electric cell that supplied an even current during continuous operation. The Daniell cell gave new impetus to electric research and found many commercial applications. In 1837 Daniell was presented the highest award of the Royal Society, the Copley Medal, for the invention of the Daniell cell.

1800 After History of Magnetism and Electricity

1800 After History of Magnetism and Electricity

1837 – Telegraph, Electromagnet

After the electric battery and the electromagnet were discovered, Samuel Morse(1791-1872) introduced the electric telegraph. Coded messages were sent over wires, by means of electrical impulses (identified as dots and dashes) known as Morse code. This was really the beginning of commercially used electricity. The electric telegraph is known as the first practical use of electricity and the first system of electrical communication. It is interesting to note here, that the Post Office in Australia, played an important part at that time, in the organizing of the communication.

1840 – Mechanical Computer

Charles Babbage (1791-1871), a British mathematician, designed several machines to generate error-free tables for navigation. The mechanical devices would serve as models for the later electronic computers.

1850 – Thermoelectricity

Thomas Seebeck a German physicist was the discover of the “Seebeck effect”. He twisted two wires made of different metals and heated a junction where the two wires met, producing a small current. The current is the result of a flow of heat from the hot to the cold junction. This is called thermoelectricity. Thermo is a Greek word meaning heat.

1854 – Boolean Algebra

George Boole was entirely self taught. He published a way of using symbols that perfectly expresses the rules of logic. Using this system, complicated rules can be written clearly and often simplified.

1855 – Electromagnetic Induction

Michael Faraday (1791-1867) an Englishman, made one of the most significant discoveries in the history of electricity: Electromagnetic induction. His pioneering work dealt with how electric currents work. Many inventions would come from his experiments, but they would come fifty to one hundred years later. Failures never discouraged Faraday. He would say; “the failures are just as important as the successes.” He felt failures also teach. The farad, the unit of capacitance is named in the honor of Michael Faraday. Magnetism and Electricity History

Faraday was greatly interested in the invention of the electromagnet, but his brilliant mind took earlier experiments still further. If electricity could produce magnetism, why couldn’t magnetism produce electricity. In 1831, Faraday found the solution. Electricity could be produced through magnetism by motion. He discovered that when a magnet was moved inside a coil of copper wire, a tiny electric current flows through the wire. H.C. Oersted, in 1820, demonstrated that electric currents produce a magnetic field. Faraday noted this and in 1821, he experimented on the theory that, if electric currents in a wire can produce magnetic fields, then magnetic fields should produce electricity. By 1831, he was able to prove this and through his experiment, was able to explain, that these magnetic fields were lines of force. These lines of force would cause a current to flow in a coil of wire, when the coil is rotated between the poles of a magnet. This action then shows that the coils of wire being cut by lines of magnetic force, in some strange way, produces electricity. These experiments, convincingly demonstrated the discovery of electromagnetic induction in the production of electric current, by a change in magnetic intensity. Magnetism and Electricity History

1860 – Arc Lights

As the practical use of electricity became evident and the electric telegraph was in operation, it was not long before scientists were looking towards making further use of this electricity. The next advance of great importance, was the introduction of the electric carbon arc light, which was exhibited in experimental form in 1808, by Sir Humphry Davey. He used a large battery to provide current for his demonstration, as these arc lights require a heavy current and no means of mechanically generating electricity had as yet been developed. The principle of these arc lights, is that when two carbon rods in a circuit are brought together, an arc is created. This arc, which gives off a brilliant incandescence, is maintained as long as the rods are just separated and keep mechanically fed this way, to maintain the arc. As the arc lights took a heavy current from these batteries, it was not until about 1860, that practical use was made of them. By this time adequate generating sources were developed and then they were only used mainly for street lighting and in picture theaters. Although arc lighting was still used until the early 1900’s they were eventually superseded by the incandescent light, except that most picture theaters use them in their projectors even today. Magnetism and Electricity History

1860 – DC Motor

The history of the electric motor begins with Hans Christian Oersted, who discovered in 1820, that electricity produced a magnetic field, as mentioned before. Faraday followed up this in 1821, by devising the principle of the electric motor of his own design. Some of those worth mentioning are Jacobi in 1834, Elias in 1842, Froment in 1844 and Pacinotti in 1860. Pacinotti used a ring wound armature which was used in 1860 and was an outstanding advance on any previous attempts. Most of these motors were in the experimental stage but it was not until 1871, that Zenobe Theophile Gramme introduced his motor, which was really a development of Pacinotti’s machine. This motor was said to be the first electric motor of commercial significance. During this period the scientists concentrated on the “motor”, but meanwhile, experiments with machines producing electricity dynamically were under way.

1866 – LeClanche Cell

Leclanche (1839-1882) is a French engineer who in about 1866 invented the battery that bears his name. In slightly modified form, the Leclanché battery, now called a dry cell, is produced in great quantities and is widely used in devices such as flashlights and portable radios. This cell consists of a zinc case filled with a moist paste containing ammonium sulfate. In the center of this electrolyte paste is a carbon rod coated with manganese dioxide, which is a strong oxidizing agent.

1871 – DC Generator

With the development of the carbon filament lamp by Edison in 1879, the DC generator then became one of the essential components of the constant-potential lighting systems. Previous to this only arc lights were used for street lighting. Then commercial lighting and residential lighting, as the inventors were aiming at, became practical and so the electric light and power industry was born. When H. C. Oersted in 1820, discovered that an electric current produces magnetic fields, the DC motor was developed. In 1831, Michael Faraday discovered the principle of electromagnetic induction. He found that moving a magnet through a coil of wire, caused an electric current to flow in the wire, thus the electric generator could now be developed. But it was not until 1871, when Gramme introduced his motor and generator, that the electric generator was used commercially. By 1872, Siemens and Halske of Berlin improved on Gramme’s generator, by producing the drum armature. Other improvements were made, such as the slotted armature in 1880 but by 1882, Edison had completed the design of the system we still use to distribute electricity from power stations. Magnetism and Electricity History

1876 – Telephone

Since the telegraph was invented by Samual Morse in 1837, great advances had been made in its utilization, but it continued as a telegraph system using Morse Code for its communication. Alexander Graham Bell in 1875, was interested in telegraphy and realized that in using Morse Code over telegraph wires there should be other ways to this form of communication using electricity. He was also interested in acoustic and sound and worked on the principle that if Morse Code created electrical impulses in an electrical circuit, some means of sound causing vibration in the air, could also create electrical impulses in a circuit. In an experiment he use a “diaphragm” associated with an electrical circuit and any sound reaching the diaphragm, would cause electrical impulses and these were carried on to the other end of the circuit. These then would cause vibrations to another diaphragm at this end and would be in relation to the first diaphragm, hence the sound was electrically transmitted from one end of the circuit to the other end. He continued working on these experiments and on March 7th, 1876 his telephone was officially patented and a successful demonstration was made at an Exhibition Hall in Philadelphia. Graham Bell was just in time to patent his telephone, as another inventor Elisha Gray, was experimenting also on a similar invention. Later, Edison improved on the diaphragm – then called transmitters – but Bell won the day, by being given the honor of inventing the “telephone”. Magnetism and Electricity History

Alexander Graham Bell (1847-1922) born in Scotland, was raised in a family that was interested and involved in the science of sound. Bell’s father and grandfather both taught speech to the deaf. A unit of sound level is called a bel in his honor. Sound levels are measured in tenths of a bel, or decibels. The abbreviation for decibel is dB.

1879 – DC Generation, Incandescent Light

Thomas Alva Edison, (1847-1931)was one of the most well known inventors of all time with 1093 patents. Self-educated, Edison was interested in chemistry and electronics. During the whole of his life, Edison received only three months of formal schooling, and was dismissed from school as being retarded, though in fact a childhood attack of scarlet fever had left him partially deaf. Magnetism and Electricity History

Nearly 40 years went by before a really practical DC (Direct Current) generator was built by Thomas Edison. Edison’s many inventions included the phonograph and an improved printing telegraph. In 1878 Joseph Swan, a British scientist, invented the incandescent filament lamp and within twelve months Edison made a similar discovery in America. Swan and Edison later set up a joint company to produce the first practical filament lamp. Prior to this, electric lighting had been my crude arc lamps.

Edison used his DC generator to provide electricity to light his laboratory and later to illuminate the first New York street to be lit by electric lamps, in September 1882. Edison’s successes were not without controversy, however – although he was convinced of the merits of DC for generating electricity, other scientists in Europe and America recognised that DC brought major disadvantages.

1880 – Heaviside Layer

Oliver Heaviside (1850-1925) The British mathematician realized that information travels along a cable as a wave in the space between the conductors, rather than through the conductors themselves. His concepts made it possible to design long-distance telephone cables. He also discoverd why radio waves bend around the Earth. This led to long-range radio reception.

1880 – Absolute Temperatures, Kirchoff’s Laws, Coulomb’s Laws, Magnetic Flux, Microphone

William Thomson, Lord Kelvin (1824-1907) was best known in his invention of a new temperature scale based on the concept of an absolute zero of temperature at -273°C (-460°F). To the end of his life, Thomson maintained fierce opposition to the idea that energy emitted by radioactivity came from within the atom. One of the greatest scientific discoveries of the 19th century, Thomson died opposing one of the most vital innovations in the history of science.

The German physicist, Gustav Kirchoff (1824-1887) extended Ohm’s Laws to deal with situations where more than one resistor was connected to more than one battery. His circuit laws state that all the current flowing into any point must also flow out of it, and that the total voltage driving current around any loop must equal the total of the voltages opposing it.

The French physicist Charles A. de Coulomb, whose name is used as the unit of electrical charge, later performed a series of experiments that added important details, as well as precision, to Priestley’s proof. He also promoted the two-fluid theory of electrical charges, rejecting both the idea of the creation of electricity by friction and Franklin’s single-fluid model. Today the electrostatic force law, also known as Coulomb’s Law, is expressed as follows: if two small objects, a distance r apart, have charges p and q and are at rest, the magnitude of the force F on either is given by F = Kpq/rr, where K is a constant. According to the International System of Units, the force is measured in newtons (1 newton = 0.225 lb), the distance in meters, and the charges in coulombs. The constant K then becomes 8.988 billion. Charges of opposite sign attract, whereas those of the same sign repel. A coulomb C is a large amount of charge. To hold a positive coulomb (+ C) 1 meter away from a negative coulomb (- C) would require a force of 9 billion newtons (2 billion pounds). A typical charged cloud about to give rise to a lightning bolt has a charge of about 30 coulombs.

James Maxwell (1831-1879) a Scottish mathematician translated Faraday’s theories into mathematical expressions. Maxwell was one of the finest mathematicians in history. A maxwell is the electromagnetic unit of magnetic flux, named in his honor. Today he is widely regarded as secondary only to Isaac Newton and Albert Einstein in the world of science.

David Hughes (1831-1900) was a professor of music and invented a successful telegraph. Back in London, experimenting with sound, he discovered an effective transducer, so sensitive that he though of it as a sound microscope, and called it a microphone.

1883 – The Alternating Current System

Nikola Tesla was born of Serbian parents July 10, 1856 and died a broke and lonely man in New York City January 7, 1943. He envisioned a world without poles and power lines. Referred to as the greatest inventive genius of all time. Tesla’s system triumphed to make possible the first large-scale harnessing of Niagara Falls with the first hydroelectric plant in the United States in 1886. With the DC generator being in operation by 1882, it was not long before the first direct-current central power station built in the United States, in New York, was in operation in 1882. Around this period however, the scientists were still active, as they realised that with DC current, they could not transmit it over long distances. Nikola Tesla , was experimenting on generators and he discovered the rotating magnetic field in 1883, which is the principle of alternating current. This rotating magnetic field changes in opposite directions fifty time a second and is called 50 Hertz. The alternating current generator has a rotating magnetic field and is referred to as a A.C. current. The direction current generator generates current in the one direction hence DC current. He then developed plans for an induction motor, that would become his first step towards the successful utilization of alternating current.

George Westinghouse was awarded the contract to build the first generators at Niagara Falls. He used his money to buy up patents in the electric field. One of the inventions he bought was the transformer from William Stanley. Westinghouse invented the air brake system to stop trains, the first of more than one hundred patents he would receive in this area alone. He soon founded the Westinghouse Air Brake Company in 1869.Westinghouse was a famous American inventor and industrialist who purchased and developed Nikola Tesla’s patented motor for generating alternating current. The work of Westinghouse, Tesla and others gradually persuaded American society that the future lay with AC rather than DC (Adoption of AC generation enabled the transmission of large blocks of electrical, power using higher voltages via transformers, which would have been impossible otherwise). Today the unit of measurement for magnetic fields commemorates Tesla’s name.

1885 – AC Generation

In 1885, George Westinghouse, head of the Westinghouse Electric Company, bought the patent rights to Tesla’s polyphase system of alternating current. In America, in 1886 the first alternating current power station was placed in operation, but as no AC motor was available, the output of this station was limited to lighting. Although Telsa developed the polyphase AC induction motor in 1883, it was not put into operation until 1888 and from then on, this AC motor became the most commonly used motor for supplying large amounts of power.

Faraday’s, discovery of electromagnetic induction, was used to create the transformer. The transformer is a simple device, mainly consisting of two separate coils of wire. When a moving current is applied to the first coil, a current is “induced” into the second coil. By this induction, the magnitude of the voltage in the second coil depends on the number of turns in the coil. If the number of turns in the second coil is greater than the first coil, the voltage is increased and vice versa. The first transformer was announced by L. Caulard and J. D. Gibbs in 1883 and so this device revolutionized the systems of power transmission. By generating at a low voltage, the transformer steps it up to a high voltage for transmission and then to a lower voltage where required.

Probably the first generating station in the world to serve private consumers was the Holborn Viaduct in London, which started up in 1882, supplying about 60 kilowatts of power. Also in 1882, Brighton in England had its first public supply and that year the Crystal Palace London, had its first demonstration of electric light. The Pearl Street Central Power Station in New York, was the first recorded station in America in 1882. One of the first transmission lines, was between Miesbach to Munich in Germany in 1882.

1890 – Electric Frequency

Heinrich Hertz (1857-1894) a German physicist, laid the ground work for the vacuum tube. He laid the foundation for the future development of radio, telephone, telegraph, and even television. He was one of the first people to demonstrate the existence of electric waves. Hertz was convinced that there were electromagnetic waves in space.

1890 – Fission

Otto Hahn (1879-1968), a German chemist and physicist, made the vital discovery which led to the first nuclear reactor. He uncovered the process of nuclear fission by which nuclei of atoms of heavy elements can break into smaller nuclei, in the process releasing large quantities of energy. Hahn was awarded the Nobel prize for chemistry in 1944.

1906 – Vacuum Tube Triode

Lee De Forest (1873-1961) made the first electronic amplifier – the triode(1906)

1910 – Theory of Relativity

Albert Einstein (1879-1955). Einstein’s formula proved that one gram of mass can be converted into a torrential amount of energy. To do this, the activity of the atoms has to occur in the nucleus. E = energy, M = mass, and C = the speed of light which is 186,000 miles per second. When you square 186,000 you can see it would only take a small amount of mass to produce a huge amount of energy.

1917 – Cobalt Steel Magnets

K. Honda and T. Takai add cobalt to tungsten steel to dramatically increase the coercive force of permanent magnets.

1919 – Commercial Steel Magnets

The first commercially available quench-hardened steel magnets were made available.

1920 – FM Radio

Edwin Armstrong (1890-1954)invented two essential building blocks of the radio – oscillators and frequency changers.

1930 – Alnico Magnets

I. Mishima produces the first Alnico magnet containing an alloy of iron, nickel, and aluminium.

1950 – Transistor

The transistor was invented in 1956 by John Bardeen, Walter Brittain and William Shockley.

1952 – Ceramic Magnets

J.J. Went, G.W.Rathenan, E.W. Gorter, and G.W. Van Oosterhout from the Phillips Company develop the first commercial ceramic magnets based on barium, strontium, and lead-iron oxides. Magnetism and Electricity History

1953 – The Integrated Circuit

In 1953, Jack Kilby created the integrated circuit.

1963 – Quarks

In 1963, Murray Gell-Mann and George Zweig of the California Institute of Technology proposed a theory according to which the electronic charge e might not be the fundamental charge after all. In their theory, heavy particles such as protons and neutrons consist of various combinations of particles called quarks. One quark is supposed to have charge (-1/3)e and another (-2/3)e. This theory has prompted a major search for quarks. Magnetism and Electricity History

1966 – Rare-Earth Magnets

Dr. Karl J. Strnat at the U.S. Air Force Materials Laboratory at Wright-Patterson Air Force Base discovers the high energy product (18 MGOe) of the Samarium-Cobalt (SmCo5) compound.

1972 – Advanced Rare-Earth Magnets

Dr. Karl J. Strnat and Dr. Alden Ray develop a higher energy product (30 MGOe) Samarium-Cobalt (Sm2Co17) compound.

1983 – Neodymium-Iron-Boron Magnets

General Motors, Sumitomo Special Metals and the Chinese Academy of Sciences develop a high energy product (35 MGOe) Neodymium-Iron-Boron (Nd2Fe14B) compound.